Old 12-02-2007, 01:42 PM
Junior Member
Thread Starter
Join Date: Aug 2007
Posts: 1

ok i need some help i am trying to do a v8 swap in a 95 stang i have everything done except for the wiring. i have an 86 302 with the wiring harness and computer from the 86 car. i can't figure out how to wire up the altenator ignition coil and starter. for some reason i get no jusice out of the ignition switch now. and there aren't any plugs for the ignition coil and altenator because they were tied into the 86's headlight harness. but i do have the plugs that are on the coil and altenator. i also disconnected the neautral safety switch but that didnt help the starter. also will i have to hardwire the fuel pump i think i read somewhere that i have to.
one other question off the wiring topic.....what would be the best cam to getr for the 86 motor being there is not that much valve clearance? any help would be greatly appreciated...mike
tjwrangler82 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -