Curtis Boggs at Race Flow Development

Old 09-28-2007, 04:49 AM
  #1  
topsportsman1
Administrator
RACING JUNKIE
Thread Starter
 
Join Date: Mar 2004
Location: Maine,USA
Posts: 1,208
Default Curtis Boggs at Race Flow Development



This is a nice write up about one of own RJ members Curtis Boggs at Race Flow Development RFD

We do appreciate what you do for us on the Engine Tech Forum,so I thought I'd give a little back,Curtis has been around the racing industries for many years,with many satisfied customers.Just listen to those that are in the winners circle every week.

This is taken from Engine Bulder Magazine.Way to go Curtis,lets all support those that support us,RFD is where its at!

http://www.engine-builder.com/ar/eb90754.htm

Race Flow Development
8532 V Terminal Rd Lorton, VA. 22079
703.339.1039
Simultaneous 5-axis CNC Porting

http://www.raceflowdevelopment.com
__________________
There Is 1 Thing Better Than Cubic Inches,,,More Of Them
topsportsman1 is offline  
Old 09-28-2007, 03:03 PM
  #2  
bjuice
Administrator
RACING JUNKIE
 
bjuice's Avatar
 
Join Date: Apr 2003
Location: Greenville s.c.
Posts: 3,239
Default

Curtis IS DA MAN !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
__________________
Bjuice..

"I'M YOUR HUCKLEBERRY ! "
bjuice is offline  
Old 09-28-2007, 05:56 PM
  #3  
edvancedengines
Senior Member
DYNO OPERATOR
 
Join Date: Feb 2006
Location: VA Hospital, Dallas, Tx (214 302 1924) cell-972-464-7400
Posts: 540
Default

I posted this reply first on www.yellowbullet.com

Tom,
Nice of you to post this here and at Racing Junk Forums. Curtis is on top of what is happening, no doubt. I think I mentioned to you that he is currently doing a special set of those new Race Flow Development (RFD Ports by his own CNC Port Desin in the Edlebrock 24 deg Victor Heads for me for one of my customers.

We will very likley be doing a stage by stage or step by step engine build up with bunches of pictures of this build right here on Yellow Bullet (Somewhere) and Also on your Racing Junk Forum, using these same special heads from Curtis Boggs. The price is right on them too.

The pic and text articles will go form beginning on through all the dyno testing and gains by dyno tuning, with also some pics of the car thios will go into. The goal and plan is a street drivable 3,500 lb Camaro that will run serious 9's on just motor with serious 8 ET capabilities while snorting the juice. We will be posting the very first dyno half-hearted puls on the first day on up through the last pulls of the terst. You and some of the guys may enjoy this. I hope other engine builders will be tollerating me.

Go RFD . Curtis Boggs is the man.

Ed

I figured for me it is easier to copy and to paste. It takes me forever to write out replies and posts.

For what this is worth to you guys, considering any custom head work or considering buying new heads.

I have put my reputation as an engine builder on what Curtis is doing for me. I am certain when we are completed in this that my reputation will remain intact and hopefully grow even stronger,.

We are doing the ultimate compromise engine, and after very careful and detailed study and research into the BMF 385, Brodix, BB 3, Steve Schmidt Conventional Nitrous Heads, and AFR 357, I have fully gotten very comfortable with what Curtis is doing.

I fully expect his head to make a huge difference in benefits for me, and unlike any of those other companies named, Curtis does not flow with an extension pipe to show bigger exhaust numbers. Those others do.

Curtis' flow numbers are real and not enhanced by pipes opr bigger orfices to make it all seem bigger. How do I know this? Simple. I have known Curtis over a long period of time on the internet, I know guys that are already using him, and I know of one Top Running NHRA Pro Stock engine that Curtis does the heads on. Besides that I trust him.

Ed
edvancedengines is offline  
Old 09-28-2007, 10:08 PM
  #4  
obsessedtruck
Member
JUNIOR BUILDER
 
Join Date: Jan 2006
Location: MN
Posts: 86
Default

Hit the nail on the head. I won't let any body else touch mine. BTW he a a very hearted person to talk and work with. . Best thing that happened to me.
obsessedtruck is offline  
Old 09-29-2007, 12:08 AM
  #5  
woodsman
Senior Member
DYNO OPERATOR
 
Join Date: Mar 2007
Location: Texas
Posts: 525
Default

Curtis JMO but it looks like some big names backing you up. Good job.
woodsman is offline  
Old 10-16-2007, 06:41 AM
  #6  
Racefab57
Senior Member
DYNO OPERATOR
 
Join Date: Nov 2006
Location: NC
Posts: 558
Default

ed and everyone else who's posted says HE'S THE ONE I agree with them! Ive learned a lot just reading the posts from everyone.there are some great people we have access to here and i appreciate it BIG TIME !!!!! thanks to all !!!! David.
Racefab57 is offline  
Old 11-22-2007, 06:13 PM
  #7  
lotsof454sss
Senior Member
DYNO OPERATOR
 
Join Date: Apr 2006
Location: North Georgia "GODS COUNTRY"
Posts: 539
Default

Curtis glad to hear your contributions to the industry are being recognized...Also as always you supply your expert opinions from the trade you have mastered to our members at RJ without asking anything in return...The members are very lucky we have the talent we do that stay with this site and contribute to them so unselfishly when a question arises...Thank you
lotsof454sss is offline  
Old 12-25-2007, 09:53 AM
  #8  
radicalz
Senior Member
MASTER BUILDER
 
Join Date: Dec 2004
Location: out of my mind in Kalamazoo, MI
Posts: 179
Default

Originally Posted by woodsman
Curtis JMO but it looks like some big names backing you up. Good job.

....just have to know the man and his work and praise automatically follows.....for those that dont know yet....Curtis IS THE MAN!!
radicalz is offline  
Old 12-27-2007, 05:54 PM
  #9  
bjuice
Administrator
RACING JUNKIE
 
bjuice's Avatar
 
Join Date: Apr 2003
Location: Greenville s.c.
Posts: 3,239
Default

James..1st off Good to see ya around...

and i think you meant to say "Curtis is DA MAN !.

LOL.

Brian
__________________
Bjuice..

"I'M YOUR HUCKLEBERRY ! "
bjuice is offline  
Old 01-31-2009, 02:34 PM
  #10  
goldenj
Junior Member
APPRENTICE
 
Join Date: Mar 2003
Posts: 21
Default

i use his edel. 24's the are the best head i've ever used i have the 2.35 valve but will be sending them back to curtis over next winter for the new cnc program and the 2.40 valve. talk to curtis he knows his stuff and a great guy i'll be a customer for a long time thanks curtis jeff
goldenj is offline  

Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service