check this Diesel daily driver out!!!!

Old 09-08-2007, 04:18 PM
  #1  
NGMdiesel
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Sep 2007
Posts: 8
Default check this Diesel daily driver out!!!!

http://www.youtube.com/watch?v=fiiFRdIjbi8

more vids can be seen at www.ngmdiesel.com

04' Common rail dodge cummins 2500

cc sb 4x4 race weight--7100lbs

single charger
stock internals
stock head

just a little bit of NOS and proper tuning!!! 8)
NGMdiesel is offline  
Old 09-09-2007, 03:29 PM
  #2  
etbird
Senior Member
MASTER BUILDER
 
Join Date: Oct 2006
Location: Georgia
Posts: 140
Default

I like that!
etbird is offline  
Old 09-09-2007, 05:36 PM
  #3  
NGMdiesel
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Sep 2007
Posts: 8
Default

It will be for sale as soon as we get her in the 10's.......

a 6pt roll bar is being installed as we speak.

Hopefully we will set another record this weekend.

10.XX would be very sweet!!!!

thanks
NGMdiesel is offline  
Old 09-09-2007, 05:54 PM
  #4  
zipper06
Senior Member
RACING JUNKIE
 
Join Date: Jan 2006
Location: La.
Posts: 2,890
Default

How much propane are you useing?, No matter it's impressive

Zip.
zipper06 is offline  
Old 09-13-2007, 01:50 PM
  #5  
NGMdiesel
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Sep 2007
Posts: 8
Default

im only useing 2 stages of nos, and each jet is very small about a .070 pill 8)
NGMdiesel is offline  
Old 09-13-2007, 09:36 PM
  #6  
zipper06
Senior Member
RACING JUNKIE
 
Join Date: Jan 2006
Location: La.
Posts: 2,890
Default

I gotta say that i'm impressed, with that weight running that quick. There's some guys around Memphis useing propane injection, but they are no where close to what you're running.
do you realise if you put that engine in 2500lbs it would run 8's ?

Zip.
zipper06 is offline  
Old 09-14-2007, 01:45 AM
  #7  
NGMdiesel
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Sep 2007
Posts: 8
Default

well accually were building the same motor and putting it in a 4-5k truck, so the 2500lbs+ drop should get us in the 9's........

if i had a 2500lbs truck thats exactly were it would go!!!

this truck will be going after we make 10's for around $55k then we are fully focused on the next project, our pro street truck!
NGMdiesel is offline  
Old 09-14-2007, 02:50 AM
  #8  
zipper06
Senior Member
RACING JUNKIE
 
Join Date: Jan 2006
Location: La.
Posts: 2,890
Default

I got a 1998 Sonoma shortbed stepside , back halfed with 9", rack and pinion,and cage, absolutely clean beautiful truck not a ding dent or scratch you could drop it right and be ready to go, if you haven't already started one.

Zip.
zipper06 is offline  
Old 09-14-2007, 03:23 PM
  #9  
NGMdiesel
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Sep 2007
Posts: 8
Default

i have a 95 ram 1500 that a diesel is going into for pro street...............but a pro mod diesel would be sweet!!!!!


only i need to sell the truck in the video first, then we could talk....
NGMdiesel is offline  
Old 09-14-2007, 03:24 PM
  #10  
NGMdiesel
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Sep 2007
Posts: 8
Default

Originally Posted by zipper06
I gotta say that i'm impressed, with that weight running that quick. There's some guys around Memphis useing propane injection, but they are no where close to what you're running.
do you realise if you put that engine in 2500lbs it would run 8's ?

Zip.
accually it would run close to high 7's :mrgreen:
NGMdiesel is offline  

Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service