Nitrous System Suggestions

Old 09-07-2007, 04:49 PM
  #1  
marshalllhancock
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Dec 2004
Location: Americus, GA
Posts: 9
Default Nitrous System Suggestions

I am looking to add a third nitrous system to my Outlaw Mustang. I currently have a sheet metal Hogan Intake that has a pair of Applied Nitrous Technology Fogger Systems. I am undecided as to what would be the best type system to add to this combination.

I have talked with a number of different nitrous specialists and most suggest I use an internal plenum type spray bar......i.e. Very Custom and VERY Expensive.

We are only looking to add the third system so that we can spray smaller hits and more of them. I have honestly been considering the newest 88 hole NOS Big Shot system with two dominator plates but wanted to hear from some people that have used a plate system on a sheet metal manifold. I am unsure of how well the distribution might be in such a long runner intake. Any information that you guys might be able to provide would be greatly appreciated.

Adding a third fogger would be tough to install under the manifold unless we cut the valley pan off and then weld it back on. I am open to any and all suggestions.
[/url]
marshalllhancock is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service