alcahol jetting

Old 09-02-2007, 06:19 PM
Junior Member
Thread Starter
Join Date: Dec 2003
Posts: 1
Default alcahol jetting

I am new to alcohol on our car. We have a 350 engine hyd cam small valve 305 heads that runs 7.40s. We tried a Phillip Bailey 750 carb this weekend the car ran fine but didn't pick up as we thought it might. We had 148 jets with power valve plugged and the car felt lazy off the line but started running on down the track. I was thinking of going smaller on the jetting. What is considered a good range to work with. And how much of a change does it take to see a difference. We were running a 650 carb with a Proform center section 70 Main jets with a power valve and 80s in the secondary.

wessonracing is offline  
Old 09-18-2007, 04:37 AM
Junior Member
Join Date: Jul 2005
Posts: 3
Default carb

148 jets are way to big. I ran a Holley 950 alcohol carb with the power valves blocked off and ended up with 132 jet size (148 were stock with the power valves) and it ran great. Exhaust temp at 1160. Try going down 10-15 jet sizes and watch your egt.
dragmag is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -