sealed power cam question

Old 08-26-2007, 11:26 AM
  #1  
rabiddawg
Senior Member
DYNO TECH
Thread Starter
 
Join Date: Aug 2007
Location: Colebrook Connecticut
Posts: 425
Default sealed power cam question

I had this cam sitting on my shelf and wanna build a 302 smallblock chevy for my next project.
heres the specs:
2200-5200 rpm
290 intake/290 exhaust
adv duration @.050
222intake/222 exhaust
valve lift .447 intake/.447 exhaust
lobe c/l 114
I think its the same as the 350 hp 327 grind.
my question is I have a new set of Harlan sharp 1:6 roller rockers
so what would be the valve lift ect. with them?
my figures would be .509 valve lift.
this might make a good all round street cam
what do ya think?
rabiddawg is offline  
Old 08-26-2007, 06:15 PM
  #2  
Racefab57
Senior Member
DYNO OPERATOR
 
Join Date: Nov 2006
Location: NC
Posts: 558
Default

Ive used this exact setup! its a great street setup!!
Racefab57 is offline  
Old 08-26-2007, 06:51 PM
  #3  
edvancedengines
Senior Member
DYNO OPERATOR
 
Join Date: Feb 2006
Location: VA Hospital, Dallas, Tx (214 302 1924) cell-972-464-7400
Posts: 540
Default

Sounds good to me. I would do it in a heart beat.

Ed
edvancedengines is offline  
Old 08-27-2007, 09:21 PM
  #4  
zipper06
Senior Member
RACING JUNKIE
 
Join Date: Jan 2006
Location: La.
Posts: 2,890
Default

I agree, i just bought a new Speed Pro with close to the same #'s. 287 with .468/.490, but with 110 lobe seperation for my street Elky. i had no vacuum with the .520/296 cam and my brakes was at best 1/2 petal and scarry. The cam i bought is going on a 350 with trick flow heads and a duel plane with a 750 vacuum secondary, stock GM short blk.
I would say good choice

JMO

Zip.
zipper06 is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service