valve lash

Old 07-29-2007, 08:39 AM
  #1  
firestone
Member
MASTER JOURNEYMAN
Thread Starter
 
Join Date: Apr 2003
Location: Fenton MI
Posts: 38
Default valve lash

When setting valve lash, what is the best way to spin the motor to open and close the valves? Is there something you can do other than clicking the ignition?

Thank you
Adam
firestone is offline  
Old 07-29-2007, 02:56 PM
  #2  
sg1586
Senior Member
MASTER BUILDER
 
Join Date: Dec 2003
Posts: 185
Default

You can pull the plugs out and turn it over with a long handle 1/2 ratchet using the damper bolt........

If you don't have one you can put a starter button on the firewall where you can reach it from eather side or just put 2 on (one on each side) and bump it over to check your lash...I think this is how most do it..Good luck
sg1586 is offline  
Old 07-31-2007, 11:23 AM
  #3  
firestone
Member
MASTER JOURNEYMAN
Thread Starter
 
Join Date: Apr 2003
Location: Fenton MI
Posts: 38
Default

thanks
Adam
firestone is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service