bracket race cam specs for 350 chevy?

Old 07-20-2007, 05:40 PM
  #1  
mikes
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Aug 2003
Posts: 1
Default bracket race cam specs for 350 chevy?

Hi, I happen to have this sbc combo and need your input on cams, 4.060 bore, 3.48 stroke, 12.7:1 to 13.05:1 compression depending on my head gasket, 4340 bottom w/ spr pistons...edelbrock vic jr intake. For heads I have ported canfield heads by mike stark of cfm performance...they started life as 200cc runners and ended up around 212...the flow numbers will be listed below. Id like a solid roller for a 2900ish lb car possibly a tad less, that weight is with driver. This engine will not see any street time, only a 1/4 mile bracket engine. Trans is a th400, I have no rear gear, converter or tire size yet as Im uncertain of what we're going to do rear suspension wise...either back half it or keep it a mini tub with a 28 ish tall slick. rpm is not a concern...I will gear and converter acordingly to match cam as well as have pro systems build a carb. Whats your reccomdation for specs ? Thanks for your help!! oh the ex numbers are without a pipe.
IN / EX
100 - 76 / 61
200 - 144 / 95
300 - 203 / 132
400 - 250 / 156
500 - 280 / 178
600 - 300 / 194
700 - 306 / 202
800 - 312 / 210
mikes is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service