header pipe size.

Old 07-03-2007, 05:04 PM
  #1  
phoenix1
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Mar 2007
Posts: 6
Default header pipe size.

I am about to have headers made for my car and i would like some input.Ihave sme serious room constraints .engine is 598 ,14.5.1 comp,dart 355cnc,alloy rods,brc pistons,1250 modified,816/783lift,287/308 duration installed on 117 cl.jesel rollers,belt drive 1000hp aspirated.also has fogger with 31jet(300).trans is glide with 1.80 low 4500 conv and 3.9 .car weighs 3200lb with driver uns on c16.also like for and against try y against 4 into 1.thanks in advance Colin
phoenix1 is offline  
Old 07-03-2007, 06:49 PM
  #2  
lanham
Senior Member
MASTER BUILDER
 
Join Date: Dec 2005
Location: berea,ky
Posts: 184
Default

Check with Lemons Headers.lemonsheaders.com.I called them and asked what they recommended when i built my headers.There are formulas you can use but i just asked them since they build them everyday.
lanham is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service