Moroso Pro Eliminator Pan

Old 05-08-2007, 10:54 PM
  #1  
novassx
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Aug 2004
Location: Vancouver Island B.C.
Posts: 11
Default Moroso Pro Eliminator Pan

I bought a CSR starter, It does not seem to fit my 540 block with this pan.

http://www.moroso.com/catalog/catego...?catcode=11341

This is the starter:
http://store.summitracing.com/partde...P&autoview=sku
Hope the links work?
Just setting the starter to the block and the pan, It does'nt look right?
Canadian EH!
Thanks Gerald PS: Hoping to go to the Dyno in June!
novassx is offline  
Old 05-09-2007, 06:40 AM
  #2  
sp2816
Senior Member
MASTER BUILDER
 
Join Date: May 2003
Location: Owingsville, Ky
Posts: 157
Default

Where is your starter hitting? The aluminum block on the starter is held on by three bolts and can be rotated to gain some clearance. But if the starter is too long, you might have to modify the pan.
I have the CVR starter, which is bigger, and Moroso pan 20370 on a Dart block, and I had to modify the cutout in the pan a little more for mine to bolt on.
sp2816 is offline  
Old 05-09-2007, 11:21 AM
  #3  
novassx
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Aug 2004
Location: Vancouver Island B.C.
Posts: 11
Default

Yes it is hitting the pan where the cut out is. And yes I am thinking I'll have to modifie the pan. Allthough I have not tried to move the block at starter yet. It said to used one of these starters. I assumed the CSR was the same as these./
"Use Powermaster or Tilton-style starter with 168-tooth flywheel" .
novassx is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service