King Demon carb help please. Jet sizes?

Old 04-20-2017, 01:42 PM
  #1  
Boatmanrand
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Apr 2017
Posts: 2
Default King Demon carb help please. Jet sizes?

Running a 28 ft. catamaran with 622 Chevy Tall deck 14-71 Moonyham Blower with twin King Demon 1095CFM carbs. She runs great but blows black fuel soot all over back of boat. It has .90 main jets in it. looking to lean it down without burning a piston. Any help would be great.
Boatmanrand is offline  
Old 04-21-2017, 05:20 AM
  #2  
curtisreed
Senior Member
RACING JUNKIE
 
curtisreed's Avatar
 
Join Date: Feb 2004
Location: KIEFER, OK.
Posts: 1,311
Default

If it were me I would step down 2 sizes at a time until I started getting close. Then you can start working to the point of being able to read the plugs for jetting. Just don't load the engine super hard after a jet change. I have never tuned in a boat, but this is how I would approach it.

Curtis
curtisreed is offline  
Old 04-30-2017, 11:33 AM
  #3  
Boatmanrand
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Apr 2017
Posts: 2
Default

Thanks for your help I will do just that.
Boatmanrand is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service