SBC 350
#12
Senior Member
EXPERT BUILDER
Join Date: Jul 2009
Location: nekoosa wisconsin
Posts: 308
take them to machine shop and have the cc volume checked but i think there way to low
64cc head should get ya 10:1 er so...
my world products 64's have plenty of room from the deck of the head to the plug hole
64cc head should get ya 10:1 er so...
my world products 64's have plenty of room from the deck of the head to the plug hole
#16
Junior Member
APPRENTICE
Thread Starter
Join Date: Dec 1969
Posts: 11
Sounds good I will take them to a machine shop and see what CC they are, another question this is a roller motor and the #3 & #5 lifters are different than the rest they are rollers but instead of the bar assembly that connects at the top of the two lifters these have like a middle brace between the two lifters and with springs in them, I'm scratching my head on this.
#18
Senior Member
RACING JUNKIE
Join Date: Jan 2012
Posts: 628
Originally Posted by hotrod1994
hmmm idk why that would be it seem as if the guy just threw this thing together with spare parts