flat tops with 306 duration cam????

Old 07-23-2012, 05:29 PM
Senior Member
Thread Starter
Join Date: Nov 2007
Location: indiana
Posts: 123
Default flat tops with 306 duration cam????

i have a 454 .030 over stock crank and rods fattops and 049 bbc heads wondering if the 11-220-4 comp cam will work for that setup? heads are setup for cam but didn't know about compression ratio??
ejm is offline  
Old 07-24-2012, 08:03 AM
Join Date: Dec 2010
Location: anchorage alaska
Posts: 56

Wallace racing has a dynamic compression ratio calculator, with aluminum heads and pump gas with a good quench you want your dcr to be under 8.5.
bluedawg357 is offline  
Old 07-24-2012, 01:30 PM
Senior Member
Join Date: May 2006
Location: Pikeville KY
Posts: 109

I once had a 454 flat top std bore truck engine with a 305H .575-.575 lift cam and it worked great. Engine went 6.90 @ 3600lbs, but I did have a set of 291 cloced chamber heads. Hope this helps.
SPEEDNEEDS1 is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -