Any one remember this OLD 350 turbo trick ???

Old 06-14-2011, 12:46 PM
Thread Starter
Join Date: Jul 2006
Posts: 86
Default Any one remember this OLD 350 turbo trick ???

i remember along time ago ( a guy at a tranny shop told me u can take the spring out of the side of the tranny (i think where the govoner is) & replace it with a small piece of broom stick and would make it hit extra hard.

i dont remember if the stick had to be longer or shorter but it did work

i know this sounds shade tree but building a buggy & was wondering if anyone rememberd how to do it.

thanks for your time & info...never did buy any trannys
sirswapsalot is offline  
Old 06-14-2011, 01:41 PM
Senior Member
Join Date: Nov 2008
Location: Niagara Falls, NY
Posts: 965

never heard of that..... :? i know they got an adjustable vacuum modal that you stick a lil screwdriver in and can screw it in or out to can make it shift diff.... :wink:
fast75vega is offline  
Old 06-19-2011, 05:07 AM
Senior Member
Join Date: Nov 2005
Location: Mobile,Al.
Posts: 127
Default trans

Yes,you can make it shift a little hard with a different servo.The best thing to do is get the servo for a older vette or call TCI.For 75$ dollars or so get a good shift kit,I would NOT put a stick in there,you will end up on the side of the road with a 1500$ repair bill.!!!
contagious is offline  
Old 06-28-2011, 06:56 PM
Senior Member
Join Date: Dec 2004
Location: austin texas
Posts: 729

All you have to do is remove the spring, the springs job is to slow the apply rate of the servo piston, most shift kits tell you to leave it out for street/strip
kwkracing is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information