DON'T BUY FRAM OIL FILTERS !!!!!!!!!!!
10-30-2009, 07:23 PM
Member
JUNIOR BUILDER
Join Date: Sep 2003
Location: las vegas
Posts: 75
What about the fram HP6 big dia filter? I ran one on my old turbo motor and never had a problem with it . oil pressure was always around 85psi during the run
10-31-2009, 05:29 AM
Senior Member
RACING JUNKIE
Join Date: Jan 2007
Location: Augusta, Ga.
Posts: 2,276
Quote:
Originally Posted by altailites
What about the fram HP6 big dia filter? I ran one on my old turbo motor and never had a problem with it . oil pressure was always around 85psi during the run
Why would you want to run
any Fram filter if
you know they have so many problems and
you know that Wix (or a few other brands) do not have
any problems ??
Bottom line for me is I WILL NOT BUY ANYTHING FRAM and why should I take a chance? My Wix filter, part # 51016R is proven!
BTW. my oil pressure in my stock '94 350 was always around 45psi until the last few miles that it dropped to less than 5psi because of FRAM.
11-03-2009, 05:46 PM
Junior Member
SHOW GUEST
Join Date: Feb 2005
Posts: 4
I've been using fram racing filters, not the stock ones and have had no problems with them in 10 years.
11-03-2009, 05:51 PM
Senior Member
RACING JUNKIE
Join Date: Mar 2008
Location: Emmett, Idaho
Posts: 7,334
You must be living right !!
11-03-2009, 08:21 PM
Junior Member
JOURNEYMAN
Thread Starter
Join Date: Feb 2008
Posts: 28
You might want to read the rest of this thread and then even though you have able to run Fram for as long as you have you just might change your mind!
11-03-2010, 05:36 PM
Senior Member
RACING JUNKIE
Join Date: Sep 2007
Location: orland pk il
Posts: 2,399
any questions about fram answered here. TTT
11-18-2010, 11:14 PM
Junior Member
SHOW GUEST
Join Date: Nov 2010
Posts: 2
DON'T BUY FRAM OIL FILTERS !!!!!!!!!!!
I had an old guy tell me once "a piss poor mechanic blames his equipment. :wink:
11-18-2010, 11:37 PM
Junior Member
SHOW GUEST
Join Date: Nov 2010
Posts: 2
Re: DON'T BUY FRAM OIL FILTERS !!!!!!!!!!!
Quote:
Originally Posted by Guber2
I had an old guy tell me once "a piss poor mechanic blames his equipment. :wink:
A filer only keeps the big piece's out :wink:
11-19-2010, 05:03 AM
Senior Member
RACING JUNKIE
Join Date: May 2006
Location: Pelahatchie, MS
Posts: 1,005
Re: DON'T BUY FRAM OIL FILTERS !!!!!!!!!!!
Quote:
Originally Posted by Guber2
Quote:
Originally Posted by Guber2
I had an old guy tell me once "a piss poor mechanic blames his equipment. :wink:
A filer only keeps the big piece's out :wink:
And a filer makes big pieces... :wink:
11-19-2010, 05:42 AM
Senior Member
RACING JUNKIE
Join Date: Jan 2007
Location: Augusta, Ga.
Posts: 2,276
Re: DON'T BUY FRAM OIL FILTERS !!!!!!!!!!!
Quote:
Originally Posted by Guber2
I had an old guy tell me once "a piss poor mechanic blames his equipment. :wink:
The good thing for Fram is I can NEVER blame it on one of their filters again because I will NEVER put a Fram filter on any of my motors again.