whats the most pump gas compression possible

Old 10-17-2009, 11:24 AM
  #1  
delete
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Aug 2003
Posts: 20
Default whats the most pump gas compression possible

any experiences on whats the most compression possible with 93 octane pump gas using aluminum heads bbc? the cam size needs to be mentioned also,in case the cam is bleeding off the compression.
delete is offline  
Old 10-17-2009, 11:29 AM
  #2  
signsbyesa
Senior Member
RACING JUNKIE
 
Join Date: Feb 2004
Location: san antonio, texas
Posts: 1,233
Default

its best to call a piston company and tell them what heads and
CC you are going to use and they can tell you what comp to use
for high octane pump gas, i was told not to go over 10.25:1
but the old 396 was running a 11.00: 1 comp due to its rod length,
but at that time the ethyl was premium 8) good luck
signsbyesa is offline  
Old 10-17-2009, 01:25 PM
  #3  
russ67chevelle
Senior Member
EXPERT BUILDER
 
Join Date: Jan 2005
Posts: 336
Default

true cam timing has to do with compression limitations.so does rod to stroke as well as air inlet temps,and how used(heavy pulling truck at low rpms and stabbing the throttle is an example of this)

the larger the cubes the less room to play with example a 396 will tolerate maybe 11 to one where as a 632 might only be 10:1....its all about cylinder pressure which i think someone might chime in for idont know max cylinder pressure u can safely get away with...


what is your combo and application?
russ67chevelle is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -