Tuning Question

Old 06-01-2009, 06:29 AM
  #11  
dparker
Senior Member
RACING JUNKIE
 
Join Date: Jun 2003
Location: Hobbs, NM
Posts: 842
Default Re: Tuning Question

Originally Posted by gullion454
I have a 2800lb, backhalved, '95 S-10 with a 10.5:1 360ci SBC. It has a solid cam (254/263 @ .050, lift: 534/555), Dart Iron Eagle heads (64cc, 2.02/1.60), roller rockers, Team G intake, Holley 750 double pumper. It has ladder bars with a Ford 9" and brand new 4:88 gears. The rear tires are 32x13.5 M/T Street Ets. I am running a powerglide trans with a hardened input shaft, 4500 stall converter and a pro brake. I am currently launching at 4300 rpm. I have an electronic shifter that shifts at 6600 rpms. My last year’s best was 7.41 in the 1/8 with a 4:11 gear and manually shifting at 6500 rpm. Last winter in when we added the new gears and the electronic shifter, and now my best is 7.66. I have tried adjusting tire pressure from 13 psi down to 9 psi, stopping at pretty much everything in between, because I was having a bit of trouble getting them to bite. I am thinking that next I will be adjusting the launch rpm and shifting rpm. Any ideas on why I lost .20? Any ideas on where I should look to get it back? Thanks.
I hope I'm not butting in David, but those M/T et slicks go away quickly and should be used on the street. They would hold a 4:11 but won't hold your 4:88. I would put as big of slicks as your truck will allow, no wider than a 14.5. You'll cut a least a tenth off your 60'.
dparker is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service