Two Quick Questions...

Old 02-07-2009, 05:33 AM
  #1  
HamerDown
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Jan 2009
Posts: 22
Default Two Quick Questions...

1)Is it true PBM HYDRAULIC ROLLER LIFTERS are made by (MADE BY MORREL)...exact same unit in a different box?

2)ERSON cams/springs/locks...feedback?

Thanks >learning something new every day.
HamerDown is offline  
Old 02-07-2009, 07:19 AM
  #2  
hammertime
Senior Member
RACING JUNKIE
 
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
Default Re: Two Quick Questions...

Originally Posted by HamerDown
1)Is it true PBM HYDRAULIC ROLLER LIFTERS are made by (MADE BY MORREL)...exact same unit in a different box?

2)ERSON cams/springs/locks...feedback?

Thanks >learning something new every day.
I know the roller lifters are made by Morel for PBM, just got a new set last week (5th set all top notch)

Erson is good stuff, Erson is owned by PBM, Manley makes the Erson springs but usually $40-50 less a set then the Manleys. Not sure who makes the cams for them but have ran it for 2 years in my 582 good stuff also. Just ordered a new set of Erson Springs, to my door $252.00 Manley price was above $300 same spring.
hammertime is offline  
Old 02-07-2009, 11:53 AM
  #3  
HamerDown
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Jan 2009
Posts: 22
Default Re: Two Quick Questions...

Originally Posted by hammertime
Originally Posted by HamerDown
1)Is it true PBM HYDRAULIC ROLLER LIFTERS are made by (MADE BY MORREL)...exact same unit in a different box?

2)ERSON cams/springs/locks...feedback?

Thanks >learning something new every day.
I know the roller lifters are made by Morel for PBM, just got a new set last week (5th set all top notch)

Erson is good stuff, Erson is owned by PBM, Manley makes the Erson springs but usually $40-50 less a set then the Manleys. Not sure who makes the cams for them but have ran it for 2 years in my 582 good stuff also. Just ordered a new set of Erson Springs, to my door $252.00 Manley price was above $300 same spring.
Thanks for the reply...so it would be a safe bet to say the PBM hyd roller specks out to be exact as the rollers in a Morrel box.
Any feedback on if Manly 4340 H-beam rods are the same as Engine-Pro...just a different box?
interesting stuff to say the least.
HamerDown is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service