SBC how much cam can I get in 9.25 deck block with 4 inch stroke 6 inch rod

Old 03-11-2018, 12:49 PM
  #1  
ka51011
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Aug 2007
Posts: 1
Default SBC how much cam can I get in 9.25 deck block with 4 inch stroke 6 inch rod

I'm building a 440 cubic SBC and it has a 4.00 stroke 6.00 rods 4.185 bore I run a .900 base Circle solid roller cam and would like to get 850 to 900 lift just wondering if it will fit in my combination without hitting connecting rods thank you
ka51011 is offline  
Old 05-01-2018, 08:26 AM
  #2  
curtisreed
Senior Member
RACING JUNKIE
 
curtisreed's Avatar
 
Join Date: Feb 2004
Location: KIEFER, OK.
Posts: 1,311
Default

You can look at the Callies Ultra offset rod to help. Also consider the lobe you will need to get .900" lift. You will probably have to have a bbc journal cam I believe to get that much lift in the block even with 1.7 rockers. At .900" with 1.7 rockers it is a .529 lobe.
curtisreed is offline  
Old 05-09-2018, 06:59 AM
  #3  
BigBlockMark
Senior Member
MASTER BUILDER
 
Join Date: Mar 2014
Posts: 209
Default

I have a 50 MM camshaft that is .850" with 1.8 rocker ratio.

It was in a 9.325" block and raised cam.

It had a 4.125" stroke crankshaft and 6.125" Callies Ultra rods.

Also have a timing cover and timing chain set to go with it.

[email protected]
BigBlockMark is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service