HELP,NEED PART #

Old 09-22-2007, 01:44 PM
  #1  
knova70
Senior Member
SENIOR BUILDER
Thread Starter
 
Join Date: Feb 2005
Posts: 122
Default HELP,NEED PART #

I am look ing for the part # on the right head studs that you should use on a GM aluminum BowTie Block with standand heads,the heads are AFR 220's they are aluminum,but use the same stamdand bolt layout as a stock head,I looked on arp site and they have so many different studs its hard to get the right choice,I know the block takes a special stud and the threads are 1 1/8 long and the bottom of the stud is rounded with a nipple,I'm sure somebody knows what this block takes,the main studs are the same as the head studs should be,it came with the main studs already,just need the part # on the main studs from ARP,thanks everybody,this is holding me up on getting this together,
knova70 is offline  
Old 09-22-2007, 07:32 PM
  #2  
Tod74
Senior Member
RACING JUNKIE
 
Join Date: Sep 2007
Posts: 4,140
Default Re: HELP,NEED PART #

Originally Posted by knova70
I am look ing for the part # on the right head studs that you should use on a GM aluminum BowTie Block with standand heads,the heads are AFR 220's they are aluminum,but use the same stamdand bolt layout as a stock head,I looked on arp site and they have so many different studs its hard to get the right choice,I know the block takes a special stud and the threads are 1 1/8 long and the bottom of the stud is rounded with a nipple,I'm sure somebody knows what this block takes,the main studs are the same as the head studs should be,it came with the main studs already,just need the part # on the main studs from ARP,thanks everybody,this is holding me up on getting this together,
Why don't you just call ARP ?
Tod74 is offline  
Old 09-23-2007, 04:27 AM
  #3  
hink
Senior Member
EXPERT BUILDER
 
Join Date: Nov 2003
Location: NORTHEAST
Posts: 290
Default

Make sure you get studs for aluminum blocks as they are bullet nosed on the end that go into the block and have much more thread and if worst come to worst call Dart and get a set from them.

What did the guy use when he plate honed your block ???
hink is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -