Mark 4 454, forged 27cc dome sealed power coated pistons turned factory crank factory rods resized new bolts king bearings hasting rings fel pro gaskets. Melting pump Muldoon pick up. Double roller timing set. balanced rotating assembly. Nos Elgin pro stock hft cam, nos crower lifters. Engine quest 320cfm square port heads. 2.25 intake 1.88 exhaust valves. Crane gold race roller rockers, comp cam magnum pushrods, comp guide plates. Cam number is E-1143 it’s 304 duration and 576 lift. Edelbrock rpm air gap intake. Summit distributer. Competition shielded plug wires. It has had the cam broken in on the run stand and all lifters are rotating. Properly. Comes minus carb starter and electric water pump but I do have a complete serpentine front dress for it. aluminum water pump and fan. alternator and power steering pump. A/c compressor And all aluminum mounting brackets needed . Belt is there but needs replaced. It is a pump gas 10-1 motor and should make good power. Got video of the motor running
