If this ad is still posted the engine is available. if you are serious about buying this motor I will give you my contact information and we can have a conversation, please stop the bogus offers through texting & messenger. Makes 1301 HP & 1054 ft lbs of torque Engine 665 BBC Donovan built by Steve Schmidt Racing Engines Low Runs 10-12 1/4 mile passed, never leaned on, no nitrous (Have full build Sheet for serious buyer ) Fuel: Sunoco Racing Gasoline Maximal 116 Leaded Fuel Oil: Royal Purple Full Synthetic Racing Oil XPR 20W-50 (Dyno Sheets to prove) Block: Donovan HC 700 aluminum ARP Studs that bolt Engine to Transmission 10.400 Deck Height ¼ water Jacket Main bore Size: Standard Lifter bores .984 Profiler 12 degree Aluminum heads with ARP head studs, ARP Stainless Header Studs T & D Roller Rockers, With Full Roller valve Train Profiler Aluminum Manifold: Split intake cut in half and ported TIG welded together 1-1450 CFM Quick fuel Carburetor Magna Fuel 4-port Regulator (with pressure gauge) Sonny Bryant Crank GRP Aluminum Rods JE Gas Ported Pistons Total Seal Rings Clevite Bearings ARP Bolts ATI Balancer Schmidt Custom Aluminum Oil Pan Flat bottom Moroso Billet Oil Pump Schmidt Custom Grind Roller Cam (Based on Competition Cam Blank) Moroso 3 Vane Vacuum pump, with aluminum Breather & Filter MSD Crank trigger, with MSD Crab tree Distributor, CSR Electric Water Pump. This engine was meticulously maintained after each weekend of racing. 29K OBO. we ran 8.20s in a 2860 lbs car with driver @ 4600 ft above sea non corrected. leaving @ 3800 rpm.
