..
For SALE or TRADE is a STEVE SCHMIDT BUILT 650 cu in TOP SPORTSMAN ENGINE--DRY SUMP NATURALLY ASPIRATED--1405 HP-- See Pic of Dyno Sheet
FRESH and READY ! --HAS NOT BEEN RACED SINCE FRESHENED
Has Run 7.20's in the 1/4 or hi 4.50's in 18--in 2600 lbs Door Car...It is not a Nitrous Engine But you Could Safely Use a 250 up to 300HP Shot of NOS if you Wanted to Run 6.90's in 1/4 or 4.40's in 1/8
PRICE IS $17990.00 US Funds
SELLING WITHOUT>> Carbs/Fuel System/Ignition/Vacuum System/Dry Sump System !
MIGHT ACCEPT TRADE ?? BUT ONLY WITH SOME CASH TO ME ??
CAN BE CRATED & SHIPPED OR YOU PICKUP--AM LOCATED in ONTATIO-- I am right at the Border, Directly Across from BUFFALO ,NEW YORK., Right Beside the PEACE BRIDGE--also am approximately 15 minutes from NIAGARA FALLS.
CALL or PM me for COMPLETE DETAILS & SPECS--IF YOU PM me or CALL me and give me your Email Address.. I can SEND YOU LIST OF ALL MAJOR COMPONENTS/PARTS/SPECS
>>..
650 ci Steve Schmidt---1405 HP--Naturally Aspirated Engine..Components List
DART 10.6 Deck Iron Block with RAISED & BILLET STEEL 4 Bolt Mains /ARP MAIN STUDS
CALLIES MAGNUM Forged 4340 Steel Crank Double Key--Std/Std
GRP Aluminum Rods/ARP bolts
JE 2618 Pistons 4.605 Bore, Gas Ported+ with TOOL STEEL PINS
Hell Fire Double Plasma Moly Rings
Rotating Assembled BALANCED Internally
Compression 15.8-1
PROFILER 12 Degree Heads..Fully CNC PORTED
ARP Head Studs
JESEL SHAFT ROCKERS--PRO Series
CAM is a CUSTOM GRIND w/ 894 Lift & w/Duration @ .050 of 288/316--Lobe Separation 116.5
.903 BUSHED MOREL Roller Lifters ( No Needle Bearings)
JESEL Belt DRIVE for Raised Cam
MOROSO DRY SUMP Oil system & External Dry Belt Driven Oil Pump(NOT INCLUDED)
MOROSO Dry Sump ALUMINUM OIL PAN(NOT INCLUDED)
ATI Harmonic Balancer
MSD Crank Trigger with Billet MSD Distributor(NOT INCLUDED)
2x4 CUSTOM MADE SHEET METAL TUNNEL
DUAL CARBS--QUICK FUEL "MODIFIED" 1250 DOMINATORS(NOT INCLUDED)
BUILT by STEVE SCHMIDT RACING RNGINES
Engine Dynoed by Schmidt at 1405HP--Naturally Aspirated
**** ENGINE was Completely FRESHENED and Has Not been Raced Since
PARTS REPLACED with NEW ONES--INCLUDE--BLOCK--RODS-RINGS/BEARINGS-LIFTERS
-VALVE SPRINGS-10 Deg KEEPERS-VALVE SEATS/VALVES MACHINED-JESEL BELT--PUSHRODS--BUSHED MOREL LIFTERS-ALL GASKETS/SEALS Oil Pump Serviced--Crank Polished--Piston Pins Fitted--All other Internal Components were all checked for Proper Specs & Tolerances and Reconditioned/Serviced if Needed.
NOT RACED SINCE FRESHENED WITH PARTS MENTIONED ABOVE
>>IF YOUR SERIOUS--I CAN CALL YOU OR YOU CAN CALL ME--FIRST CONTACT can also be a Direct MESSAGE by EMAILING ME Direct to-- [email protected] OR CALL 647-515-2738
Thanks
