Mono shock front suspension dragsters
#31
Member
JOURNEYMAN
Thread Starter
Join Date: Apr 2003
Location: Terry,MS
Posts: 32
we have a 468bbc right now in our vette that weighs 2705 with me in it and its been 5.91 at 119mph and he said this dragster weighs 1760 with 210lb drive so it will be 1780lbs with me in it i figured it would run 4.90s with my motor what do you think?
#32
Senior Member
EXPERT BUILDER
Join Date: Aug 2007
Location: Orient, OH
Posts: 384
My car was done at Diamond over the winter. It is a hard tail rear and they put the front suspension and new body on it. I have never has such quality work done before.
I would say you should run 5.05 ish to be honest with ya. My door car was 700 pounds heavier than my dragster and I picked up right at .70 by going to the dragster.
With the same drivetrain my 60 foot picked up .04. and my et picked up about .08 but the feel of the car is unbelieveable, especially in the pits!
The biggest thing about the front suspension is that now my lights can usually stay within about .007 all day. Before you would get a crazy one here and there, because it would snap the front wheels up.
here are a few pics of mine...
Now:
Suspension:
Here is what it looked like before:
I would say you should run 5.05 ish to be honest with ya. My door car was 700 pounds heavier than my dragster and I picked up right at .70 by going to the dragster.
With the same drivetrain my 60 foot picked up .04. and my et picked up about .08 but the feel of the car is unbelieveable, especially in the pits!
The biggest thing about the front suspension is that now my lights can usually stay within about .007 all day. Before you would get a crazy one here and there, because it would snap the front wheels up.
here are a few pics of mine...
Now:
Suspension:
Here is what it looked like before:
#33
Senior Member
RACING JUNKIE
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
Originally Posted by sgchevy2nova
we have a 468bbc right now in our vette that weighs 2705 with me in it and its been 5.91 at 119mph and he said this dragster weighs 1760 with 210lb drive so it will be 1780lbs with me in it i figured it would run 4.90s with my motor what do you think?
#35
Senior Member
RACING JUNKIE
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
Originally Posted by sgchevy2nova
i dunno what convertor we should use really because we have always had door cars mine right now flashes at 6400
When I ran 468 I had a 5800 stall but I like them a little looser now more consistent.
Is the converter you have now a 8" ?
#36
Member
JOURNEYMAN
Thread Starter
Join Date: Apr 2003
Location: Terry,MS
Posts: 32
yes it is but i just talked to a guy and he wants my convertor for his convertor and he said that it was set up for his 496 and was built for the car from PTC but he didnt tell me the stall on it
#37
Senior Member
RACING JUNKIE
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
Originally Posted by sgchevy2nova
yes it is but i just talked to a guy and he wants my convertor for his convertor and he said that it was set up for his 496 and was built for the car from PTC but he didnt tell me the stall on it
#38
Member
JOURNEYMAN
Thread Starter
Join Date: Apr 2003
Location: Terry,MS
Posts: 32
yeh its a 8" i'm going to find out what it stalls to before i go and trade my convertor for his but i'm thinking it will be fine since he was running 5.0's and 8.0's with the car with a mild 496