everybody post a pic of there ride
#162
Senior Member
SENIOR BUILDER
Join Date: Apr 2007
Location: Mississippi Gulf Coast
Posts: 124
Race cars tore apart in the shop right now, so I'm gonna put in my grocery getter that suprises the locals.
'69 Stepside C10, '72 Vette 350, 400 Turbo, 12bolt w/ 3:73's. With the Bowtie factory performance cam, 3'' alum high rise and 780cfm dual line she'll break 12sec and still gets 16mpg! (My daily driver, by the way)
'69 Stepside C10, '72 Vette 350, 400 Turbo, 12bolt w/ 3:73's. With the Bowtie factory performance cam, 3'' alum high rise and 780cfm dual line she'll break 12sec and still gets 16mpg! (My daily driver, by the way)
#164
Senior Member
SENIOR BUILDER
Join Date: Apr 2007
Location: Mississippi Gulf Coast
Posts: 124
Thanx.
I know this is primarily a car site, BUT a hotrod is a hotrod, right?
This little girls got factory cases milled to take the oversized flywheels, 10:1 Weisco pistons, Edelbrock aluminum topend w/ Manley SS valves, Andrews N8 cams and an S&S Super "B".
Her 60 foot time........................spooky!
I know this is primarily a car site, BUT a hotrod is a hotrod, right?
This little girls got factory cases milled to take the oversized flywheels, 10:1 Weisco pistons, Edelbrock aluminum topend w/ Manley SS valves, Andrews N8 cams and an S&S Super "B".
Her 60 foot time........................spooky!
#165
Senior Member
DYNO OPERATOR
Join Date: Mar 2007
Location: Texas
Posts: 525
real3fann very nice camaro but like they say let us see some numbers because it makes us feel good. alscoupe that is a good looking truck. And the hog is nice also me and the wife ride all the time. Good jobs guy's keep up the good work. Wesley
#167
Member
JOURNEYMAN
Join Date: Nov 2003
Location: SoCal
Posts: 31
Thanks all..It's a 67 SS Camaro tube chassie all steel body @ 3150# with me in it.. It has a 540 BBC . Which made 884 Hp and 727 Tq on the dyno. And with a 100 shot of happy gas it made 1018 Hp and 860 Tq The engine is a Dart Big M block Comp roller cam Scat crank and rods JE 14.5 pistons AFR 345 heads Ported by Portflow development in Lancaster Ca. To date the best it has run is a 9.03 @149.94 on motor and 8.76 @153 on a 100hp hit of juice.
#169
Senior Member
MASTER BUILDER
Join Date: Mar 2007
Location: mich
Posts: 208
sevendmach1, this maybe a dumb question but doesn't the mustang have side scoops or is that a different yr. my old man had one i always though it was a 70 but it had side scoops. very nice cars