Mike Chapman racing heads
#1
Junior Member
SHOW GUEST
Thread Starter
Join Date: Dec 2008
Posts: 2
Mike Chapman racing heads
I have a set of Brodix 10x heads for sbc that say Chapman Racing Heads on them. They have a bunch of #'s stamped on the front where the accessories would go. I was curious what these #'s mean and if anyone has any contact information for Mike Chapman? I googled him and found a # but the number I called is no longer any good. I would like to find out a bit more about these heads and if they are any good or not. Thank You
#2
Senior Member
RACING JUNKIE
Join Date: Jan 2006
Location: La.
Posts: 2,890
Can you post the #'s? i have a set of Brodix 10's also with #'s on them, i called Brodix to see what they meant. My are marked RP's FP's, SP's they mean raised intake ports, filed pushrod holes, and spead port exhaust., Mine are fully ported but i don't know by who, but they flow 314 CFM at .600 lift, with 2.150 int valves.
Is this the ph# you have, the site listed below it is a profile of the business. Don't know if he's still in business or not though.
Name: Chapman Racing Heads Inc
Phone: (801) 292-3909
Fax: (801) 292-3701
Address: 2261 South 1560 West
Woods Cross, UT 84087
http://www.manta.com/c/mm2mt6s/chapman-racing-heads
Zip.
Is this the ph# you have, the site listed below it is a profile of the business. Don't know if he's still in business or not though.
Name: Chapman Racing Heads Inc
Phone: (801) 292-3909
Fax: (801) 292-3701
Address: 2261 South 1560 West
Woods Cross, UT 84087
http://www.manta.com/c/mm2mt6s/chapman-racing-heads
Zip.