Abruzzi.......?
#1
Senior Member
RACING JUNKIE
Thread Starter
Join Date: Mar 2003
Location: Fountain,MICHIGAN
Posts: 856
Abruzzi.......?
Anyone TRY to Deal with these Guys?
Been waiting for Over a week,sent 3 emails,NO RESPONCE........?
They have a Jones Trans Recirculating Pump,Cooler Advertised.I sent emails to ask for some More INFO.................................?Crickets!
Anyone else out there that Offers this type of Deal?
Cause these Guys Obviously DONT Need My $$$,I bet theres someone out that will....?
Later
G :?
Been waiting for Over a week,sent 3 emails,NO RESPONCE........?
They have a Jones Trans Recirculating Pump,Cooler Advertised.I sent emails to ask for some More INFO.................................?Crickets!
Anyone else out there that Offers this type of Deal?
Cause these Guys Obviously DONT Need My $$$,I bet theres someone out that will....?
Later
G :?
#2
Senior Member
RACING JUNKIE
Join Date: Mar 2003
Location: Ohio
Posts: 936
Marco does not do the computer at all and the guy that does it may be out. He will be the 1st one to tell you that. It is always best to call Marco.
I looked for Marco's adds and I see all the trans and converter ads but not the one you made mention of.
If it is Marco Abruzzi call him Ph: (330) 369-1707
We deal with Marco daily. Very straight up, honest man and by all standards, he is the best of the best in the racing industry when it comes to his transmissions and customer service.
I looked for Marco's adds and I see all the trans and converter ads but not the one you made mention of.
If it is Marco Abruzzi call him Ph: (330) 369-1707
We deal with Marco daily. Very straight up, honest man and by all standards, he is the best of the best in the racing industry when it comes to his transmissions and customer service.
#3
Senior Member
RACING JUNKIE
Thread Starter
Join Date: Mar 2003
Location: Fountain,MICHIGAN
Posts: 856
?
Normally I would Call,but this is something I wanted in BLCK and White!
If He can do Internet Stuff,They should'nt List a Website with EMAIL Options?
I Still have not had a Responce?
Looking into another style that ATI Offers,now?
Thanks!
G 8)
If He can do Internet Stuff,They should'nt List a Website with EMAIL Options?
I Still have not had a Responce?
Looking into another style that ATI Offers,now?
Thanks!
G 8)
#4
Senior Member
RACING JUNKIE
Join Date: Mar 2003
Location: Ohio
Posts: 936
Depending when it was sent, 1 guy was in Texas with the ADRL, Marco delivering about a half dozen transmissions to Bowling Green. Still no reason not to return an email. I have an email in to the guy that runs the site for Marco to see if there are problems. I know he was out of town as well.
I still don't see the ad you are talking about. Is it on his site or is it here on RJ? Is the stuff from Bob Jones?
I still don't see the ad you are talking about. Is it on his site or is it here on RJ? Is the stuff from Bob Jones?
#5
Senior Member
RACING JUNKIE
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
Pink ..
http://www.racingjunk.com/category/1...omeFeaturedAds
He is right Marco is easier to catch on the phone
http://www.racingjunk.com/category/1...omeFeaturedAds
He is right Marco is easier to catch on the phone
#7
Senior Member
RACING JUNKIE
Join Date: Mar 2003
Location: Ohio
Posts: 936
Thanks Dave. I did not see the ad.
Looks like it would be a nice bolt on piece to ad to a car where it could function pretty easy in the lanes if it could be plumbed in line. If it is something that has to come on and off the car between rounds I am not how well it would work for a bracket car. You figure the majority of the heat build up comes during round robin periods when hot lapping a car. If you have to install and remove the pump would there be enough time?
Looks like it would be a nice bolt on piece to ad to a car where it could function pretty easy in the lanes if it could be plumbed in line. If it is something that has to come on and off the car between rounds I am not how well it would work for a bracket car. You figure the majority of the heat build up comes during round robin periods when hot lapping a car. If you have to install and remove the pump would there be enough time?
#8
Senior Member
RACING JUNKIE
Thread Starter
Join Date: Mar 2003
Location: Fountain,MICHIGAN
Posts: 856
?
Shawn
Thats WHY I sent a email to them,I have ALOT of Questions about the Way its Plummed,and where,and How it Circulates,the Fluid?
Its
Dave,
Its for My Car,was just wanting it so you can Keep the Oil Cooler between Rounds!
Auto Trans KILLER=HEAT!!!!!!!!!
Theres has Still been no Responce,from Abruzzi.........?
So I will March on with this Other Deal!
600.00 for that Pump is a Bit SALTY?
Later
G 8)
Thats WHY I sent a email to them,I have ALOT of Questions about the Way its Plummed,and where,and How it Circulates,the Fluid?
Its
Dave,
Its for My Car,was just wanting it so you can Keep the Oil Cooler between Rounds!
Auto Trans KILLER=HEAT!!!!!!!!!
Theres has Still been no Responce,from Abruzzi.........?
So I will March on with this Other Deal!
600.00 for that Pump is a Bit SALTY?
Later
G 8)
#9
Senior Member
RACING JUNKIE
Join Date: Mar 2003
Location: Ohio
Posts: 936
I would probably call the guy that builds them since his phone number is right on the pump. I am sure that he woudl explain the pump, how it works and give you a direct price on the pump. That is not a kit that Marco put together. It is a kit that he sells for Bob Jones.