hp est
#1
Senior Member
SENIOR BUILDER
Thread Starter
Join Date: Nov 2007
Location: indiana
Posts: 123
hp est
just would like a close est? bbc 454 bored and stroked to 496. je 13to 1 comp pistons doug hubert solid roller cam 714/714 dart iron heads 308 with 2.25 int and 1.88ext holley strip dom intake with 850 modified carb and all msd ignition straight headers and all electric components, water, fan thanks for all estimates :?:
#7
TQ is the advantage of running the smaller head..i also run a smaller valve head on a 565ci in my camaro (with a lot of Runner work),,,cause its a Heavy pig i run in the 1/8..so i wanted it to be a little more Tq'y.
i think Slickfuel is all over it,,could be a tad more HP..But not enough to beg the differ...
ok i will say 573 hp...same Tq as what Slick fuel says....LMAO
THE OLD PRICE IS RIGHT TRICK !
i think Slickfuel is all over it,,could be a tad more HP..But not enough to beg the differ...
ok i will say 573 hp...same Tq as what Slick fuel says....LMAO
THE OLD PRICE IS RIGHT TRICK !
__________________
Bjuice..
"I'M YOUR HUCKLEBERRY ! "
Bjuice..
"I'M YOUR HUCKLEBERRY ! "
#8
Senior Member
MASTER BUILDER
Join Date: Dec 2004
Location: out of my mind in Kalamazoo, MI
Posts: 179
Right around 600hp...the heads are limitin you with that cam...go to an aluminum head that breaths better like Dart Pro !'s say 325's goes to around 700hp, 355's around 750hp....