looking to build a stroker
#5
Senior Member
MASTER BUILDER
Join Date: Jul 2006
Posts: 184
Just built one. 406, Scat cast steel crank, Scat H-beams, Srp pistons, Pro-1 Platinumn 230's with a bit of work, mild solid roller, Super Vic, QF 950carb. 615hp and 540 ft/lbs on pump gas
Frank
Advanced Performance
www.get-ap.com
Frank
Advanced Performance
www.get-ap.com
#6
Originally Posted by Pwmax
Just built one. 406, Scat cast steel crank, Scat H-beams, Srp pistons, Pro-1 Platinumn 230's with a bit of work, mild solid roller, Super Vic, QF 950carb. 615hp and 540 ft/lbs on pump gas
Frank
Advanced Performance
www.get-ap.com
Frank
Advanced Performance
www.get-ap.com
Curtis
#8
Senior Member
MASTER BUILDER
Join Date: Oct 2003
Posts: 144
I had a sbc stroker built with Compstar components and I was pretty happy. It's made overseas but final machining is dome by calais.
4" stroke 4.155 bore is a good combo. compression should be no more than 10-1 for pump gas, Brodix track ones ( cnc) should make 650 hp on that setup.
Al
4" stroke 4.155 bore is a good combo. compression should be no more than 10-1 for pump gas, Brodix track ones ( cnc) should make 650 hp on that setup.
Al