1964 - 1967 GM "A" Body Chassis
This is a great opportunity to buy a ready to go chassis for your next build. All work was professionally done and will work for application on a 1964-1967 GM including Chevelles, Olds Cutlass, Buick Skylark and more. See the full break down below.
FOR CONSIDERATION
Frame has an ABC Performance Mini Tub frame kit installed. Can handle 335/R30 rears.
HPI frame box package
All body mount locations had added washers welded to strengthen the body
mount locations
All factory welds were completely gone over with a wire welder and ground smooth
Aluminum solid body bushings
Suspension:
Global West extended travel upper and lower front tubular control arms
Global West upper shock mount extended travel frame modification added
Fat Man 2 inch drop spindles
Bear Front Hubs with 1/2" Studs
Global West 1-1/4" front sway bar
PCS 13:1 steering box
Moog ball joints
All new steering linkage and aluminum adjusting turn buckles
Viking dual adjustable shocks, all 4, 650lb. springs in front ( BBC ) 180lb. in rear
springs coated to match Baer Pro 6 Piston Calipers and drilled / Slotted 14" Discs.
New engine motor mounts
PMT aluminum rear upper and lower tubular control arms
Global West rear frame supports
Moser Ford Fab 9 rear housing with rear housing support added, powder coated to
to match springs and calipers.
Moser axles
Frame was epoxy primed with a PPG 2 stage paint
Not included in this sale:
Guni wheels
Get it for your build at $18,000.00!
