..
For SALE or TRADE is a STEVE SCHMIDT BUILT 650 cu in TOP SPORTSMAN ENGINE--DRY SUMP NATURALLY ASPIRATED--1405 HP-- See Pic of Dyno Sheet
FRESH and READY TO RUN --HAS NOT BEEN RACED SINCE FRESHENED
Has Run 7.20's in the 1/4 or hi 4.50's in 18--in 2600 lbs Door Car...It is not a Nitrous Engine But you Could Safely Use a 250 up to 300HP Shot of NOS if you Wanted to Run 6.90's in 1/4 or 4.40's in 1/8
PRICE IS $24950.00 US Funds
MIGHT ACCEPT TRADE ?? BUT ONLY WITH SOME CASH TO ME...OR REASONABLE CASH OFFER >> LOW BALLERS WILL BE IGNORED.
CAN BE CRATED & SHIPPED OR YOU PICKUP--AM LOCATED in ONTATIO-- I am right at the Border, Directly Across from BUFFALO ,NEW YORK., Right Beside the PEACE BRIDGE--also am approximately 15 minutes from NIAGARA FALLS.
CALL or PM me for COMPLETE DETAILS & SPECS--IF YOU PM me or CALL me and give me your Email Address.. I can SEND YOU LIST OF ALL MAJOR COMPONENTS/PARTS/SPECS
>>..
650 ci Steve Schmidt---1405 HP--Naturally Aspirated Engine..Components List
DART 10.6 Deck Iron Block with RAISED & BILLET STEEL 4 Bolt Mains /ARP MAIN STUDS
CALLIES MAGNUM Forged 4340 Steel Crank Double Key--Std/Std
GRP Aluminum Rods/ARP bolts
JE 2618 Pistons 4.605 Bore, Gas Ported+ with TOOL STEEL PINS
Hell Fire Double Plasma Moly Rings
Rotating Assembled BALANCED Internally
Compression 15.8-1
PROFILER 12 Degree Heads..Fully CNC PORTED
ARP Head Studs
JESEL SHAFT ROCKERS--PRO Series
CAM is a CUSTOM GRIND w/ 894 Lift & w/Duration @ .050 of 288/316--Lobe Separation 116.5
.903 BUSHED MOREL Roller Lifters ( No Needle Bearings)
JESEL Belt DRIVE for Raised Cam
MOROSO DRY SUMP Oil system & External Dry Belt Driven Oil Pump
MOROSO Dry Sump ALUMINUM OIL PAN
ATI Harmonic Balancer
MSD Crank Trigger with Billet MSD Distributor
2x4 CUSTOM MADE SHEET METAL TUNNEL
DUAL CARBS--QUICK FUEL "MODIFIED" 1250 DOMINATORS
BUILT by STEVE SCHMIDT RACING RNGINES
Engine Dynoed by Schmidt at 1405HP--Naturally Aspirated
**** ENGINE was Completely FRESHENED and Has Not been Raced Since
PARTS REPLACED with NEW ONES--INCLUDE--BLOCK--RODS-RINGS/BEARINGS-LIFTERS
-VALVE SPRINGS-10 Deg KEEPERS-VALVE SEATS/VALVES MACHINED-JESEL BELT--PUSHRODS--BUSHED MOREL LIFTERS-ALL GASKETS/SEALS Oil Pump Serviced--Crank Polished--Piston Pins Fitted--All other Internal Components were all checked for Proper Specs & Tolerances and Reconditioned/Serviced if Needed.
NOT RACED SINCE FRESHENED WITH PARTS MENTIONED ABOVE
>>IF YOUR SERIOUS--I CAN CALL YOU OR YOU CAN CALL ME--FIRST CONTACT can also be a Direct MESSAGE by EMAILING ME Direct to-- [email protected] OR CALL 647-515-2738
Thanks
