what type of transfer case does my silverado 1500 have in it

[ikeman]

its a 2000

[johnracer]

Several possibilities. Most likely a NewProcess/Venture. There should be a round metal disc bolted to the back of it with all the info.....


Johnny

[ikeman]

there is no tag onn it so im wondern which one it is

[johnracer]

Push button or lever?

[ikeman]

push button

[johnracer]

Should be a NVG-246....

Johnny

[ikeman]

ok i have one out of a 2003 1500 but the wireing isnt the same is there anyway i can make it work?

[johnracer]

What's different? The connectors or ? If memory serves, the only connectors are the encoder (shift motor), a switch on top that locks in the front axle, a syncro clutch connector at the rear, and a front & rear speed sensor. Could you swap those components to the newer t/c and plug in your existing wiring? I think they all unbolt or screw out except for the syncro clutch. You might have to change the connector on that.

Hope this helps,

Johnny

[ikeman]

the one out of the 2000 has like 5 plugs on it i think and the 2003 only has three

[ikeman]

does any one knows what all year transfercases will fit my 2000 chevy 1500? thanks

[MudWild680]

We're not going to be much help here, not sure what you were thinking posting such questions here...


You need to register over at fullsizechevy.com
They will give you all the information you need.