HP Guesstimate/ Desktop Dyno
 

454 Stroked to a 496
4340 Forged Crank
H Beam Rods
KB Forged 10.1:1 Compression Pistons
Profiler 320cc/119cc Heads 2.300/1.880 Valves
Hyd Roller 248/256 @50 629/643 Lift on a 112 LSA
Crane Gold 1.7 Rockers
Edelbrock Air Gap Manifold
Quick Fuel 830CFM Street/Strip Carb
Mech Fuel Pump

My heads, crank and rods should be here by friday than its time for assembly. Block is prepped and ready to go. I will hopefully have her on our dyno within 2-3 weeks :lol: Than its off to getting the TH400 done and a Dennys Driveshaft made up 8)

10:1 pistons,..is that with those heads ?????

if so this is what I get,...


554 HP @ 5500
576 FTLBS @ 4500

650ish

Yes 10.1:1 and they are 119cc