RACING MOTOR FOR THE FIRST TIME
 

MOTOR IS 406 CHEVY,4340 CRANK,6 INCH H-BEAM RODS,JE FLAT TOP PISTONS WITH 2 VALVE RELIEFS MAYBE 11.5 COMP?CAM IS SOLID ROLLER WITH ROLLER LIFTERS AND ROCKERS 260/265 @50,678/688 EXHAUST,SUPER VICTOR INTAKE PORT MATCHED TO AFR 210CC HEADS COMP PORTED,PRO SYSTEMS 840 CFM CARB,MSD6AL IGNITION,8 INCH ATI CONVERTER,4:56 RING&PINION,TURBO 350 28X9X15 INCH SLICKS IN A 86 MONTE CARLO.SHOULD I JUST FLOOR IT OR BABY IT A COUPLE OF TIMES?

did you build it to baby?

I would just stomp it !

on race cars i would go balls to the wall every time if its gunna break now itll break later but street i would baby it for a while jmo

DO YOU THINK THIS COMBO WILL PUT ME IN THE 10.50 TO 10.90 RANGE?

what dose it weigh or way :?:

3485 WITH DRIVER

mine is #3000 with me and I run (depending on the weather)10.70-11.10 running a 360 cid.big roller

I hope the T-350 is built.

MY OTHER MOTOR (406) RAN 11.60 WITH A 510 LIFT CAME 10 INCH CONVERTER AND 3.90 GEARS.

I have 4.56 & 30in tall tires,T-350(that is now broke) 8) and go through the lights at 7000 rpm.

I think you will need a bigger tire.

WHY?