Racingjunk Forums
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

Racingjunk Forums (https://www.racingjunk.com/forums/index.php)
-   Engine Tech (https://www.racingjunk.com/forums/forumdisplay.php?f=9)
-   -   What would you give ? (https://www.racingjunk.com/forums/showthread.php?t=19381)

obsessedtruck 01-07-2008 04:20 PM
There is a NEW set sitting in the machine shop but they are for 18* big dukes for a 4'' stroke, 6.535 rod, 9.8 DH. I'm not sure what your combo consists of. Between my boss, friend of mine and me are all big duke/ chief.

hammertime 01-07-2008 04:31 PM
Originally Posted by obsessedtruck
There is a NEW set sitting in the machine shop but they are for 18* big dukes for a 4'' stroke, 6.535 rod, 9.8 DH. I'm not sure what your combo consists of. Between my boss, friend of mine and me are all big duke/ chief.
Its a tall deck bowtie block conv heads though. Thanks for letting me know though. I got a good deal on a 4.625 block last summer that needed a sleeve, thought I'd try and find some pistons for it.

bbchevy 01-07-2008 05:45 PM
Block
 
Originally Posted by hammertime
Originally Posted by obsessedtruck
There is a NEW set sitting in the machine shop but they are for 18* big dukes for a 4'' stroke, 6.535 rod, 9.8 DH. I'm not sure what your combo consists of. Between my boss, friend of mine and me are all big duke/ chief.
Its a tall deck bowtie block conv heads though. Thanks for letting me know though. I got a good deal on a 4.625 block last summer that needed a sleeve, thought I'd try and find some pistons for it.
David,
Did the Block come from the Nashville Area??
Later
G 8)

hammertime 01-07-2008 06:31 PM
Re: Block
 
Originally Posted by bbchevy
Originally Posted by hammertime
Originally Posted by obsessedtruck
There is a NEW set sitting in the machine shop but they are for 18* big dukes for a 4'' stroke, 6.535 rod, 9.8 DH. I'm not sure what your combo consists of. Between my boss, friend of mine and me are all big duke/ chief.
Its a tall deck bowtie block conv heads though. Thanks for letting me know though. I got a good deal on a 4.625 block last summer that needed a sleeve, thought I'd try and find some pistons for it.
David,
Did the Block come from the Nashville Area??
Later
G 8)
It came from Chicago area off ebay, was suppose to be ok had my guy check it and sure enough cracked under the sleeve in it, no biggie new sleeve and away we go :D still into it cheap


All times are GMT -8. The time now is 02:46 PM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page