member 666

[arrow76]

Watch what he is selling, sold me heads and claimed they were dart and arent and same as the intake i bought from him suppose to be for a 10.2 deck bbc and is for a 9.8 deck bbc, just watch what you buy from him.

[TheRabbit]

Watch what he is selling, sold me heads and claimed they were dart and arent and same as the intake i bought from him suppose to be for a 10.2 deck bbc and is for a 9.8 deck bbc, just watch what you buy from him.

Bought from an add on RJ? if so please post the add #.

Thanks

[Harbone]

Is this the ad for the heads?

http://www.racingjunk.com/Heads/2840570/bbc-dart-pro-2-380cc-.html

[arrow76]

add num 2863055

[arrow76]

and yes that add was for the same heads

[Harbone]

Have you tried to contact him with any response? I am going to send him a message and see what happens.

[arrow76]

Yes i have and no response, but a lesson learned again. Im not persueing it, heads already at my machine shop try to get set up for my engine and well intake up for sale for a loss.. Not worth my time or efort, just warning others cause see heads still listed and he has other stuff up for sale also.

[zipper06]

I looked at his other ad and he's advertising a 580" short blk as a tall deck, i couldn't see the front of the blk so i couldn't tell if it was, don't know if he ran those heads on it though. Does the manifold fit the heads with a tall deck/10.2 i know they make tall deck manifolds which are different than short deck, others use spacer plates to use a short deck manifold, just asking.
I just built a 482 short deck for someone that had heads off a tall deck blk, i used stacks injection and had to use .080 manifold gaskets for it to line up.

Zip.

[arrow76]

i bought couple diff thickness intake gaskets and when get heads back from machine shop im gona see how every thing fits and if it doesnt just put my old dart intake back on. Thanks

[hammertime]

Has anyone sent him a message telling him to come on here ?


What I've seen with some of the dart heads, they sell a lot of blems, could it be possible you may have a dart head thats been ported out to a 380 ?

[arrow76]

well they are a cnc head, but not very well done heads and well dont really car at machine shop getting work done to them now, and he hasnt emailed me back and he still showing the same heads for sale, so maybe he should remove those adds, and the intake i will just sell and deal with the losses my self, i was just letting people know to double check before buy anything from him

[arrow76]

and they advertised as pro 2 and well they dont look near as good as my 345 pro 1.

[Harbone]

Has anyone sent him a message telling him to come on here ?


I sent one yesterday, he has not replied

[hammertime]

well they are a cnc head, but not very well done heads and well dont really car at machine shop getting work done to them now, and he hasnt emailed me back and he still showing the same heads for sale, so maybe he should remove those adds, and the intake i will just sell and deal with the losses my self, i was just letting people know to double check before buy anything from him

Thanks for getting on here and letting us all know, but as far as I am concerned anyone that did you wrong should try to make it right, hopefully he gets on here.

[arrow76]

I agree thanks but it not worth my time to fight with him, just gona get shit done right so can get my engine together

[oldandtired]

Anyone who choses 666 as their screen name is looking for trouble.
Rev 13:11-18.

[Scooterz]

AMEN!!! I hate that damn #. Good luck on the motor!!!

[666]

hey am the guy that sold you heads and intake, you have my phone number why dont you call me dumb ass???? . first of all you took 3weeks to pay me. just so every one knows i dont lie. my name is tyson conard, my racing junk user name is 666. just so every knows is motor was last yr. built by triple r racing in quincy il phone phone is 1-217-224-6060 talk to steve the owner that built and he will tell you they are dart pro2 380cc. bought heads bare and had parts put n them. only things is we cnc where it said 380cc so no one would know what heads wehad. cnc was not good???? ok... intake was tall deck merlin x gasket ported and pleum ported and powder coated, had over $4500 in heads and $600 in intake,only 20passes on them. , you paid me $3200. i got charged threw palpay and paid shipping. you got one hell of a deal......................... so call me mother fucker i got proof of what i sold you and have machine shop number on here to back me up mother fucker. you want to bash me where your proof. becuase i have all mine here so everyone can see

[Harbone]

hey am the guy that sold you heads and intake, you have my phone number why dont you call me dumb ass???? . first of all you took 3weeks to pay me. just so every one knows i dont lie. my name is tyson conard, my racing junk user name is 666. just so every knows is motor was last yr. built by triple r racing in quincy il phone phone is 1-217-224-6060 talk to steve the owner that built and he will tell you they are dart pro2 380cc. bought heads bare and had parts put n them. only things is we cnc where it said 380cc so no one would know what heads wehad. cnc was not good???? ok... intake was tall deck merlin x gasket ported and pleum ported and powder coated, had over $4500 in heads and $600 in intake,only 20passes on them. , you paid me $3200. i got charged threw palpay and paid shipping. you got one hell of a deal......................... so call me mother fr i got proof of what i sold you and have machine shop number on here to back me up mother fr. you want to bash me where your proof. becuase i have all mine here so everyone can see


there is the other side of the story...

[666]

my phone number is 1-309-299-5038. if you want your money we can do that???? you put not going to pursue?????? why not if i did you wrong,because you know your wrong???? whats heads are they then?i txt me after you got and ask about intake gasket, well you and your machine must be dumb ass because they make 1/16 0r 1/8 you have to see what your motor takes and i txt you that back. and you on here say i would not buy from someone that user name is 666 can kiss my ass, get a life because you on here talking shit when you dont know me

[666]

o by the way, i took heads off ad when you only gave me half the money, so ad has nt been on there

[mopar1968]

Well now, Ball is in other court now :!: :!: So if they aren't Dartpro2 head's what are they :?:


Mark

[bigray]

hummmm 666 you curse him.. but yet he doesnt call you the F word or Dumb ass. usually when somebody does that, it meens there wrong and just mad they got caught, ??

[666]

bigray you say i curse means i got caught? lmao bigray you not that smart are you? read my post i havei my proof and phone numbers for what i sold. i have a right to curse when someone said i sold him wrong parts. i dont see his proof do you? if i sold wrong parts he would persue it and i said would give his money back??? where is he at now??? dont get on here alot because i have a live, so my number on here and so is machine shop to back me up that built the motor.

[Scooterz]

Look "666" maybe under the rock you live under people talk you all the time... but here we don't like it. Bigray is right; usually when someone comes in here talking like you do; its because they have something to hide or have been caught doing something. No one is impressed with your key-board commando attitude & number of stupidity... take a hike & don't let the door hit you on the way out.

[Scooterz]

BTW: Bigray is a lot smarter than you. He has a "live" too... dummy... start learning how to spell before you pick a fight with everyone.

[arrow76]

part num on the intake is 63040 is for a short deck and well had to get head welded from a crackin it either due to shipping or some sort of accident and i will post pics, and emailed pics of heads to dart and they say not theres so if you have a recipt i wopuld like to see it for these heads. Thanks Gordon

[arrow76]

And if you want me to ship heads and intake back and you refund me i be more then happy to send them back including what i have spent on the heads, i get them back from my machine shop, this week on the 23yrd so let me know what you want done, i will have them back in the mail by friday

[arrow76]

so everyone knows he been talking to me now and we trying to deal with it. Gordon

[666]

so everyone know the parts i sold him he found out that everthing is what i said. he does not want his money back and wants to keep parts. scootrz you tell me learn how to type? lol you need to learn how to type a sentence that make sence

[Harbone]

Tyson,
I want to personally thank you for coming over and telling your side of the story. Most people we send messages to never reply or state their case. Everybody on this forum are good guys, please take some of the posts with a grain of salt. If you are ever over by Bloomington send me a message and I will buy you a cold one!

[Scooterz]

No disrespect Harb... you handle these things better than me. I commend you for that. I get defensive when someone such as "666" comes on here swinging both fists, insulting our friends like Bigray, calling people F-bombs & dumb-asses... we should call them out & tell them to go back to MySpace if they want treat people like crap. Tyson could be totally justified 100% & will not earn respect or be heard if he talks like a PUNK on his first posts. You know these guys come & go out of here all the time; very few stay & respect or understand loyalty/friendship... they leave their CRAP here & then bolt. Like I said; don't let the door hit you on the way out "666".... see you in Hell. NOT.

[Harbone]

No disrespect taken Scoot, I think he was a little lit up and came in swinging. Would not be the 1st time, probably wont be the last. I sent him the message on RJ to come over and state his case, glad he did and the buyer now seems happy too. I figured an olive branch was a good way to end things and you know me, I dont do that to often!! :lol:

[666]

thanx harbone for email me or i would of never know somone was on here was sayn i sold junk. funny how i sold junk and now he wants to keep parts, i had my machine number on here for my proof of what i sold and told him i would give money back and he said that hes happy and wants to keep? if there was something wrong he should of called me first. i have a right to come on here swinging when someone lies about i scam them.scooterz you get on here and think your the judge, when you dont know the truth, then you tell me meet me in hell?, but you say am bad one on here,o wait your a church person but judge everyone thats what so funny. harbone i stated my case and have proof and said will give money back and now story changes, dont to get on here no more,but thank you

[666]

hey harbone, where you race at? we race at cordova alot, have a few cars but will be race a black malibu 1980 and my twin brother will be in a blue one. maybe we can meet up at track?

[zipper06]

hey harbone, where you race at? we race at cordova alot, have a few cars but will be race a black malibu 1980 and my twin brother will be in a blue one. maybe we can meet up at track?

Hey 666, i also race a black 80 malibu, but with a s/blk, but that's not the question, and that :?: is who's headers do you or did you run with your b/blk, since i'm thinking about stepping up to one.

Zip.

[Harbone]

hey harbone, where you race at? we race at cordova alot, have a few cars but will be race a black malibu 1980 and my twin brother will be in a blue one. maybe we can meet up at track?

Hey 666, i also race a black 80 malibu, but with a s/blk, but that's not the question, and that :?: is who's headers do you or did you run with your b/blk, since i'm thinking about stepping up to one.

Zip.

Last track I raced at was Havana and that was late 2007. I gave up drag racing when it cost to much for me to get to the track.
Zip I have been looking at your avatar for years and Tyson said he has a black Malibu. Well I used to have a Pro Street Malibu about 5 years ago, it was the biggest pain in my ars but it looked pretty sweet.

http://s3.amazonaws.com/s3.racingjunk.com/ui/1/25/15740251-686.jpg

http://s3.amazonaws.com/s3.racingjunk.com/ui/2/22/15740222-456.jpg

[zipper06]

Hey Bone kinda looks like twinzes, mine is backhalfed 4 link 9" full cage stock front suspension. all windows work all gages still in the car, stock dash even has the AC/heater controls. Only fiberglass is hood and bumpers. It's not fast, best 6.40@104 MPH with 377" on alcohol. I built it in 2000 and it drives like a grocery getter down the track.

Zip.

Here's the full size version.

http://img.photobucket.com/albums/v515/zipper2/000_0003.jpg

[Harbone]

Mine was more of a street car Zip, small block, radical cam, Turbo 400 and a Ford 9". The back half was all square tube and it still rode on leaf springs so the drive on the street was pretty nice. I never made it to the track and the car was a thorn in my side since the guy I got it from completely lied to me about the internals of the motor.

[Scooterz]

[quote="666"scooterz you get on here and think your the judge, when you dont know the truth, then you tell me meet me in hell?, but you say am bad one on here,o wait your a church person but judge everyone thats what so funny. harbone i stated my case and have proof and said will give money back and now story changes, dont to get on here no more,but thank you[/quote]

666; I am not a judge, don't want to be one either. No where did state I am a "church" person either... I am a defective Christian at best... fair enough 666?? By default, I was in Bigrays corner because he has been around a while & he is one of our buddies here. So I talked some smack... I do that sometimes. I believe in sticking up for your friends is important. Like you, I find it interesting the guy who complained is nowhere to be seen anymore... so many "stir the pot" around here & bail out. You hung around, stated your case, defended what you had done. I respect that.

[BEAST477]

Hey Bone kinda looks like twinzes, mine is backhalfed 4 link 9" full cage stock front suspension. all windows work all gages still in the car, stock dash even has the AC/heater controls. Only fiberglass is hood and bumpers. It's not fast, best 6.40@104 MPH with 377" on alcohol. I built it in 2000 and it drives like a grocery getter down the track.

Zip.

Here's the full size version.

http://img.photobucket.com/albums/v515/zipper2/000_0003.jpg


Hey that is the first pic I've ever seen of the Malibu. That thing is sweet and straight as an arrow from what I can see.

[zipper06]

It is as the picture shows Beast, not a ding dent or scratch, absolutly no rust ever, no patch panels, and never any bondo.
Below is the little brother my 79 Elky, i finished it 25 yrs ago, it rolled out of the paint booth Dec. 24,1988 and that's the paint that's still on it. Ocasionaly i pull the race car on an open trailerwith the Elky, it gets some looks when driving down the road for sure.

Zip.

http://img.photobucket.com/albums/v515/zipper2/el_Camino-2.jpg

[Scooterz]

BTW: Zip that is quite a car... she launches/hooks nice in the pics. it is sinister looking in Black... good looking ride!!

[arrow76]

Not all lies the intake is for the 9.8 deck and will not work on my 572 tall ddeck, , but we did decide to keep it and put it on are 9.8 deck 509 tho, And heads were repaired!!!

[666]

i told you i called merlin and they said numbers on intake was not part number because they dont put part number on them. did you try to put on motor?intake i used it on my tall deck and bought it new. post pic. of it on here, and everyone that has had few intake be for will know it for a tall deck just lookn at it because where intake runners are it has a twice thicker flange bc it has to for the gap. or will buy it back? and you stated on here heads where repaired, you told me you had welded because vavle rail was crack from shipping. i had shipping ins on them. just so everyone knows you had them weled not me or called before they where welded

[arrow76]

does not fit i put on and yes i just had it welded just sick of the crap!!

[hammertime]

Hes offered to buy everything back, I don't see the trouble there ?

I can tell you 95% of people do not even come on here for their side of the story and 99% of them do not offer to refund. Like he said post some pics of all this, maybe he will refund you for fixing the head and buy the intake back ?

[arrow76]

ya he offered a refund minus other stuff to,.. SO might as well kep the stuff and sell it to get what i really suppose to get!!!!

[gmanxss]

ARROW, SOUNDS LIKE THE GUY IS TRYING TO WORK WITH YOU AND YOU ARE HARD TO PLEASE. POST EXACTLY WHAT U EXPECT FROM HIM AND SEE WHAT HE SAYS. :D :shock: :P :idea:

[666]

you put your sick of this crap? why you got on here and started it? i know your lien about intake i bought new and used it, post pics. like i said and everyone will know its for a talldeck by how thick the flange is where runners are. right? you had welded by vavle cover rail you told me. you should of called me before ever touching because i had shipping ins. on it..... if it did get damage in shipping how that put on me???? how about this you post pics on here and if people think i did you wrong yes will buy back??? i lost money threw paypal and i paid shipping so i got $3000 after said and done, you ship them back and i will give you that back too??? if its junk i think you would jump on that:)

[666]

you put your sick of this crap? why you got on here and started it? i know your lien about intake i bought new and used it, post pics. like i said and everyone will know its for a talldeck by how thick the flange is where runners are. right? you had welded by vavle cover rail you told me. you should of called me before ever touching because i had shipping ins. on it..... if it did get damage in shipping how that put on me???? how about this you post pics on here and if people think i did you wrong yes will buy back??? i lost money threw paypal and i paid shipping so i got $3000 after said and done, you ship them back and i will give you that back too??? if its junk i think you would jump on that:)

[nopro]

you put your sick of this crap? why you got on here and started it? i know your lien about intake i bought new and used it, post pics. like i said and everyone will know its for a talldeck by how thick the flange is where runners are. right? you had welded by vavle cover rail you told me. you should of called me before ever touching because i had shipping ins. on it..... if it did get damage in shipping how that put on me???? how about this you post pics on here and if people think i did you wrong yes will buy back??? i lost money threw paypal and i paid shipping so i got $3000 after said and done, you ship them back and i will give you that back too??? if its junk i think you would jump on that:)

my opinion , a buyer mods or repairs (????) a part without contacting the seller first . he accepted the parts and got no right to bitch or ask for a refund .

[chuck408]

I wish I would have looked at this part of RJ before I bought the 580. He lied about the amount of run time on it. It had 6 collapsed pistons and anywhere from .006-.013 wall to piston clearance. I have contacted him with no success. I asked for the money to buy pistons and to pay for the boring of the block. He denied and refused to do anything. I have the pistons in my trailer for when we do cross paths again at a track. Karma has a way of finding you, good or bad.