HP EST AND 1/4 MILE TIME EST

[hotrod1994]

sbc 350 stock bottom end 10:1 compression with

aluminum angle plug heads ebay heads
intake Port Volume 210cc
Intake Valve Size 2.02
Exhaust Valve Size 1.60

lunati 60105 cam
Advertised Duration : 284° /292°
Duration @ .050 IN/EX : 241° /249°
Gross Valve lift IN/EX .525''/.546''
LSA and ICL 110/106
RPM Range: 2500-6600

High Rise Aluminum Intake ebay intake
single palne 2500 -7500 rpm rang

holley 750

Mallory hy fire 6 and Mallory unilight distridutor with msd blaster coil

th350 stage 2 shift kit 2200 stall 4:10 gears and 29x12.50 m/t sportsman pro

[MEMRACING62]

mid 300's....carb is to big ....with that stall & carb you are not going to be happy

[fast75vega]

im gonna go with around 375hp and low 12's in the 1/4

[bixblk]

360 HP
I agree with the stall speed being too low, 3500 would be better, put a small NOS kit on this set up, they seem to wake up this combo.
750 carb have alot of range but it maybe a bit too big w/o spray
JMO

[JEFF69Z28]

sbc 350 stock bottom end 10:1 compression with

aluminum angle plug heads ebay heads
intake Port Volume 210cc
Intake Valve Size 2.02
Exhaust Valve Size 1.60

lunati 60105 cam
Advertised Duration : 284° /292°
Duration @ .050 IN/EX : 241° /249°
Gross Valve lift IN/EX .525''/.546''
LSA and ICL 110/106
RPM Range: 2500-6600

High Rise Aluminum Intake ebay intake
single palne 2500 -7500 rpm rang

holley 750

Mallory hy fire 6 and Mallory unilight distridutor with msd blaster coil

th350 stage 2 shift kit 2200 stall 4:10 gears and 29x12.50 m/t sportsman pro
WHAT DOES THE VEHICLE WEIGH

[hotrod1994]

its a stock body 76 camaro around 3500