carb spacer

[Moparmike55]

I am looking for a carb spacer to run on my 360cid crate motor. Just install an Edelbrock air gap 7576 with a 750 Holley. May have to go to a ½” for hood clearance, is 4 hole, 2 hole or wide open the best.
Mike

[mopar1968]

I run a 4 hole spacer on my small block into a indy intake :!: :!:



Mark

[fast75vega]

I run a 4 hole spacer on my small block into a indy intake :!: :!:



Mark

now... why a four hole... s their really a difference? im running a open spacer with a 4 hole on top of that.

[cncmotorsports]

Every engine is different. Some like open spacers, some ported spacers.

Typically we see the 4 hole ported spacers work the best for most applications.

Hamburger makes a nice 1 inch ported spacer.

[mopar1968]

Mine is a ported 4 hole spacer. The bottom side of the holes are larger than the top of the holes.Engine was dynoed with spacer :!:


Mark

[Moparmike55]

Mine is a ported 4 hole spacer. The bottom side of the holes are larger than the top of the holes.Engine was dynoed with spacer :!:


MarkMark, Did you enlarge the spacer yourself or did it come that way, and who makes it? Thanks,
Mike

[mopar1968]

Here it is if you will look the hole's are tapered, It work's like a champ on my car :!: :!: The guy's that dynoed my engine worked to get me the best from the engine and found this plate work's great :!: :!:

http://www.jegs.com/i/Barry-Grant/132/110019/10002/-1?parentProductId=743575



Mark