AFTERMARKET STEERING

[JEFF69Z28]

WILL A GRADE 8 1/4 INCH BOLT BE GOOD ENOUGH TO HOLD THE STEERING KNUCKLE TO THE STEERING SHAFT,STEERING ASSMEBLY IS CHROME MOLY. :?:

[johnracer]

You'll need to clarify exactly where this bolt is going. The ONLY place I'd use a 1/4" bolt on the steering would be to retain the u-joint to the shaft or the shaft to the gear....the knuckle thing has me confused.....easy to do by the way

Johnny

[TheRabbit]

You'll need to clarify exactly where this bolt is going. The ONLY place I'd use a 1/4" bolt on the steering would be to retain the u-joint to the shaft or the shaft to the gear....the knuckle thing has me confused.....easy to do by the way

Johnny

I was thinking the same thing. Wasn't sure what he was asking.
If it's any help I sure hope a grade 8, 1/4"bolt is good enough to hold the steering shafts together because that's what I use.

[JEFF69Z28]

You'll need to clarify exactly where this bolt is going. The ONLY place I'd use a 1/4" bolt on the steering would be to retain the u-joint to the shaft or the shaft to the gear....the knuckle thing has me confused.....easy to do by the way

Johnny

I was thinking the same thing. Wasn't sure what he was asking.
If it's any help I sure hope a grade 8, 1/4"bolt is good enough to hold the steering shafts together because that's what I use.AFTERMARKET STEERING COMES THRU FIREWALL ATTACHES TO U JOINTTHEN TO SHAFT THEN TO U JOINT ON MANUAL BOX,THE OTHER JOINTS ARE TO BE TIG WELDED

[TheYellaBrick]

pic didn't show !

[TheRabbit]

http://i163.photobucket.com/albums/t288/rabbit548/Steering.jpg

Is this what you're asking?