the boss gave me the OK to look for another car!!!!

[rabiddawg]

I got 60 grand waiting for a new car
looking for a 1969 camaro drag car with some use on the street.
any ideas on where to find one?
btw I didnt see anything that interest me in RJ classified section
car must be back halved with proffesional certified framework.
looking to build a 8 second car.

[Harbone]

damn!! does she have a sister? looks are not a requirement and this point and time... :lol:

[rabiddawg]

yeah she got a sister but I wouldnt take her out in public without a leash lol.
been saving for years and put my foot down and its time to do some track time Im thinking befre im too old and lose interest.
besides its my turn after i restored the 69 corvette i bought her 2 years ago.
her very first trophy last september.
http://webpages.charter.net/harrycoon/Picture%20017%20(Small).jpg
http://webpages.charter.net/harrycoon/Picture%20018%20(Small).jpg

[mopar1968]

I will if she give's me the ok like you got it :!: :!: AND I WON'T EVEN USE A LEASH :!: :!:


''JUST MY TWO CENT'S WORTH''

[Harbone]

I will if she give's me the ok like you got it :!: :!: AND I WON'T EVEN USE A LEASH :!: :!:


''JUST MY TWO CENT'S WORTH''

:lol: :lol: :lol:

you can always get an invisible fence with a shock collar!!!

[rabiddawg]

LOL
the wife knows her way around a car
she buffed out the vette after i painted it.
And she finally told me to get what i want cuz i work so hard lol
Im still shocked!!!!

[lively]

And she finally told me to get what i want cuz i work so hard lol :lol: :lol: :lol: :lol: :lol: :lol:

MAN --YOU HAVE GOT HER FOOLED :D :D :D :D :D :D

[mopar1968]

Shoot yeah Chris, I want a Pro stocker :!: :!: Buy me that and i would take her anywhere :!: :!:


''JUST MY TWO CENT'S WORTH''

[bjuice]

Ya wanna run 4 seconds on Nitrous or mid 5's on motor with LOW maintenace ?

look at my avatar...over 100k invested in the car...it can be yours for the low price of $60,000...

[lively]

Ya wanna run 4 seconds on Nitrous or mid 5's on motor with LOW maintenace ?

look at my avatar...over 100k invested in the car...it can be yours for the low price of $60,000...

AND BRIAN WILL EVEN THROW IN LITTLEHOTRODS PERSONAL PHONE NUMBER SO HE CAN HELP YOU GET THE CAR DELIVERED TO YOU :lol: :lol: :lol:

[MEMRACING62]

DONT THINK IT WILL FIT IN A OIL SOAKED BOX :lol:

[bjuice]

Ya wanna run 4 seconds on Nitrous or mid 5's on motor with LOW maintenace ?

look at my avatar...over 100k invested in the car...it can be yours for the low price of $60,000...

AND BRIAN WILL EVEN THROW IN LITTLEHOTRODS PERSONAL PHONE NUMBER SO HE CAN HELP YOU GET THE CAR DELIVERED TO YOU :lol: :lol: :lol:


OUCH.....oK $59,995

[rabiddawg]

hmm got any pics???
any specs etc.
looking for a camaro but ill bite at anything .
cheaper to buy already built than to start from scratch.
if your serious ill do a little side trip next time im at Norfolk VA.
I have transport already set up
nephew drives for a transport company up and down the east coast.

[TopspeedLowet]

I got 60 grand waiting for a new car
looking for a 1969 camaro drag car with some use on the street.
any ideas on where to find one?
btw I didnt see anything that interest me in RJ classified section
car must be back halved with proffesional certified framework.
looking to build a 8 second car.

Well, if Brians car is a possible. Then I would like to pitch my Beretta chassis that I have for sale here on RJ. First, it is not a street car, However, depending on your performance attitude it could be. The Chassis is certified 25.4 just renewed in september, good till 2012. It will run mid sevens 184 MPH with a 1170 HP push. It ran 8.002 170 MPH with a bone 1000 HP engine and a TH400 trans. The car is 1000 pounds lighter than a back half car and will go lot's faster with same power. This car is completely new in 07, paint, differential, struts and steering pieces. The ad # is 1701526, It is the Dark Garnet Metallic one. This package leaves you needing a relatively inexpensive $10,000 900 HP crate motor to run low 8's from the builder of your choice, and leaves $22,000 in you pocket for fuel and or flowers for that wonderful wife of yours. Beast 477 can verify the condition and performance of this chassis if you would like an outside opinion on the quality of this chassis.
Bruce

[rabiddawg]

nice ill have to show a few guys this and tell me what they think.

[TopspeedLowet]

Boy Brian, that tank of yours sure quick. That engine has a lot of smoke to push that car so fast. That car set up would cost a ton more than $65,000 to recreate even with used parts.
I could not resist the chance to plug my chassis. You never know!
Bruce

[bjuice]

Boy Brian, that tank of yours sure quick. That engine has a lot of smoke to push that car so fast. That car set up would cost a ton more than $65,000 to recreate even with used parts.
I could not resist the chance to plug my chassis. You never know!
Bruce

u know i Luvssss ya Bruce !

[bjuice]

hmm got any pics???
any specs etc.
looking for a camaro but ill bite at anything .
cheaper to buy already built than to start from scratch.
if your serious ill do a little side trip next time im at Norfolk VA.
I have transport already set up
nephew drives for a transport company up and down the east coast.


sorry i took the pics and Vids off...the car ain't for sale.....in all my years racing i haver never had a small tire Car this heavy hook so well..as a matter of fact i haven't had a Big tire car hook this well also...lol.
so its just not that i couldn't replace for this price...but Its hard to get one to Work like this one does.....its more Un-common than Common to get a Door car 3,000 lbs with 10.5 tires running 1.10 60fts...with such a small amount of NOS

But the guy who owned it before me had about 100k in the car...Alan Pittman did the chassis..Alan is Ex-promod Driver and one of the premiere chassis Builders in the World...and Not cheap..lol... :shock:

In the spring i am going to Atlanta and experience a little 1/4 Action.. i Looking for some 190mph stuff in the car...should be Fun!!!

Anyhow Good luck with finding your New car..

[rabiddawg]

NP
i understand ill keep looking.
At least ya didnt have me go down there just to turn around lol.

[bjuice]

NP
i understand ill keep looking.
At least ya didnt have me go down there just to turn around lol.

no i wouldn't do that to you...lol

[rabiddawg]

brother inlaw is willing to sell me his 53 chevy for 40 grand
I helped with the work so i get a good price
355 donovan block
titanium rods and valves
AFR heads (dunno the specs)
6-71 weiand blower
set up for alcohol and nitrous at this point 250 dual stage
chrome moly tube chassis
heres a few pics of the build
http://i44.tinypic.com/w9fojl.jpg
http://i42.tinypic.com/vrplw2.jpg
http://i44.tinypic.com/2uf9dme.jpg
http://i41.tinypic.com/b52ttj.jpg
http://i43.tinypic.com/2yobyh1.jpg
http://i41.tinypic.com/34h870p.jpg
http://i42.tinypic.com/2jd526t.jpg

[]
http://www.freeimagehosting.net/uploads/7b0b67f77e.jpg (http://www.freeimagehosting.net/)
http://www.freeimagehosting.net/uploads/52c6f01bc3.jpg (http://www.freeimagehosting.net/)
http://www.freeimagehosting.net/uploads/5acfa7676a.jpg (http://www.freeimagehosting.net/)

[bjuice]

it looks nice !

[TheYellaBrick]

MAN, do I love those in progress shots !! I can look at them all day long.... GORGEOUS workmanship.

[BEAST477]

Good lookin' ride, nice workmanship. With $60,000.00 to work with you'll have lots of options to choose from.

[Harbone]

WOW, thats one sweet car! At least if you buy that one, you know what you are getting and no surprises...

[rabiddawg]

yes I agree and Ill know who to go to.