Need some Help with a windage tray

[jrsmith80]

I am assembling my short block and am having trouble figuring out where each stud goes to mount my Moroso Louvered Windage Tray. I lost the instructions and need to know which holes the tray mounts with. I got a ARP stud kit and it sure seems like I am missing a stud but ARP tells me that I am not. I know this sounds stupid but I need some help cuz my windage tray is in a different motor about 100 miles away. Thanks in advance.

Here is the windage tray I have:

http://www.summitracing.com/parts/MOR-23020/

And here is the stud kit that I am using:

http://www.summitracing.com/parts/ARP-234-5601/

[fla1976]

Call the tech line listed on this site:
http://www.moroso.com/support/tech_support.asp

[jrsmith80]

Call the tech line listed on this site:
http://www.moroso.com/support/tech_support.asp

I got it figured out, apparently ARP only sends out 5 studs with standoffs in their stud kit, which in turn will not work with the windage tray that I have. Kind of a joke, but I was told by a lady that if I needed another bolt then I would have to purchase one. It would be noice if that was stated in the description when ordering.

[kwkracing]

The last hole in the windage tray uses the oil pump stud or bolt and not one of the long studs that would have came with a arp stud kit???