PDA

View Full Version : turbo 350 or glide


gearhd14534
03-03-2009, 06:14 AM
building gasser...stock 454... 9" posi ford with 3:50 gears(street, to and from track)....29"tall mt street/strip radials 10.5 w..car wgt 2600#s..no trans brake.......will run 1/8 and 1/4....turbo or glide?

bjuice
03-03-2009, 03:09 PM
Glide....reason i say this is that it takes much less Hp to turn the Glide..cannot locate but i read somewhere it takes like 30 plus hp to spin a Turbo vs. 5 or 6 hp to spin a Glide.

now donlt qoute me on these numbers but i am sure its a Big difference.

Brian

TheYellaBrick
03-03-2009, 05:18 PM
I've seen power usage charts but am not able to find one as yet to post on here.

fla1976
03-03-2009, 05:30 PM
Here is a site that has some info:
http://www.stockcarracing.com/techarticles/general/scrp_0810_automatic_transmission_performance/powerglide.html

Tod74
03-05-2009, 06:00 AM
powerglide

but I'd go steeper on the rear gear because of it.

gyellow
03-14-2009, 09:46 PM
sry to butt in but im interested as well becuase iam building a street/strip and was goign to put a 400 in my car but was thinking about a glide.. how is a glide on the street? how streetable is it??

Tod74
03-14-2009, 09:56 PM
sry to butt in but im interested as well becuase iam building a street/strip and was goign to put a 400 in my car but was thinking about a glide.. how is a glide on the street? how streetable is it??

High gear is 1:1 no matter which way you go...only thing is the lower 1st gear in a 3 speed allows for less gear in the rear which makes for better street driving...

If it is mainly a street car and once in awhile you take it to the track I'd run a three speed...if it is primarily a race car then glide hands down.

JMO I never had a glide on the street.

bjuice
03-15-2009, 06:24 AM
sry to butt in but im interested as well becuase iam building a street/strip and was goign to put a 400 in my car but was thinking about a glide.. how is a glide on the street? how streetable is it??

very streetable..stay with the helical gears like the 1.76 planatery if mainly street driven..the straightcut gears are for racing (1.80 ratio is most popular)

many cars from the past ran Glides on the street.
Bottom line a glide is gonna free up valuable engine HP

gyellow
03-15-2009, 07:56 AM
awesome well it looks like a found my tranny of choice haha... what can a stock glide handle for power?

bjuice
03-15-2009, 01:43 PM
stock 176 planateries can handle 800hp on the strip no problems

Tod74
03-15-2009, 08:30 PM
don't fool with the 1.82's...they will go kaboom with big power....NO personal experience with them just what I have been told....and a side by side comparison shows they look much weaker.

onefastcamaro
03-19-2009, 03:09 PM
dont forget if the car is 3000 plus lbs a 1.80 first gear in the glide is almost a must to get ya off the line nicely, i had a 350 turbo in my 3300 lbs street car and went to the glide and 60ft slowed up a little, changed the converter and added a little more stall speed and 60's were back also mph was up by 5mph with the glide