This Car is a SUPER NICE 65 Malibu SS (Clone) with ghost flames
It is a factory AC, PS, PB; car and originally came with a 283 and 2 speed PG.
It now has a solid lift roller Big Block Chevy with a 700r4, 4 wheel disc brakes. A narrowed 9INCH Ford was installed along with a new Positive traction unit, with 456 gears. Rolling stocks consists of a set of weld drag light with Mickey Thompson 29 x 18.5 x 15 rear tires and 28 x 7.5 x15 ON front. The rear was back halved on the car using a ladder link system, and Koni coil adjustable coil over shocks. The rear sub frame was built using square tubing and all the wheel tubs etc. mounted to it and then we also mounted all of it to the new frame using rubber mounts so the rivets would not pull out when the car flexed. This also makes for super quite cruising so that way it stays quiet when it is driven occasionally on nice weather permitting days.

A dyno program was run on the car and 729 HP is what it should have. I put a fiberglass cowl hood on it and painted it Black Cherry with ghost flames. A local upholstery shop done the custom interior (Rodgers Upholstery of Macon ). AnoThis Car is a SUPER NICE 65 Malibu SS (Clone) with ghost flames
It is a factory AC, PS, PB; car and originally came with a 283 and 2 speed PG.
It now has a solid lift roller Big Block Chevy with a 700r4, 4 wheel disc brakes. A narrowed 9INCH Ford was installed along with a new Positive traction unit, with 456 gears. Rolling stocks consists of a set of weld drag light with Mickey Thompson 29 x 18.5 x 15 rear tires and 28 x 7.5 x15 ON front. The rear was back halved on the car using a ladder link system, and Koni coil adjustable coil over shocks. The rear sub frame was built using square tubing and all the wheel tubs etc. mounted to it and then we also mounted all of it to the new frame using rubber mounts so the rivets would not pull out when the car flexed. This also makes for super quite cruising so that way it stays quiet when it is driven occasionally on nice weather permitting days.

A dyno program was run on the car and 729 HP is what it should have. I put a fiberglass cowl hood on it and painted it Black Cherry with ghost flames. A local upholstery shop done the custom interior (Rodgers Upholstery of Macon ). Another local shop installed the stereo system and alarm. It has an alpine cd player with alpine tweeter ,6.5 door speakers ,9������½ rear speakers and 2 punch 10'S with 2 alpine amps .
The Engine has Keith black pistons, Comp solid lift roller cam and lifters, Gm pink rods, Calies crank, A set of Gm 106 cc heads. They have been worked and Larger Manley race valves were installed Along with all arp bolts and a set of stud girdles. Edelbrock Intake with a Holey 830cfm Model 4150 carb. It has hooker 25/8 headers going thru a custom exhaust system. I installed Zoopes brackets and a type 2 Gm power steering unit with a quick ratio steering box. The firing is handled by a MSD 6AL system and MSD distributor. The fuel system has an aluminum fuel cell and is pushed using an electric fuel pump.

Nice alpine stero system with multiple amps and speakers, custom fuel cell covered in leather. Lot and Lots of little deails I'm leaving out. I can can also email more build pictures too if needed. This was almost a pefect car before the resto and these other photos show the car all the way through the frame off resto. It's a very nice head turning ride anywhere you take it!

There are lots of details I'm possibly leaving out but this covers most of it. It will definitley make someone a super nice Pto Street or Pro Touring car.i will consider your trade with some cash and I know you will not be disappointed
ASKING $22500 OR MAKE A GOOD OFFER I WILL TRADE GIVE ME A CALL 859-992-3485
ther local shop installed the stereo system and alarm. It has an alpine cd player with alpine tweeter ,6.5 door speakers ,9½ rear speakers and 2 punch 10'S with 2 alpine amps .
The Engine has Keith black pistons, Comp solid lift roller cam and lifters, Gm pink rods, Calies crank, A set of Gm 106 cc heads. They have been worked and Larger Manley race valves were installed Along with all arp bolts and a set of stud girdles. Edelbrock Intake with a Holey 830cfm Model 4150 carb. It has hooker 25/8 headers going thru a custom exhaust system. I installed Zoopes brackets and a type 2 Gm power steering unit with a quick ratio steering box. The firing is handled by a MSD 6AL system and MSD distributor. The fuel system has an aluminum fuel cell and is pushed using an electric fuel pump.

Nice alpine stero system with multiple amps and speakers, custom fuel cell covered in leather. Lot and Lots of little deails I'm leaving out. I can can also email more build pictures too if needed. This was almost a pefect car before the resto and these other photos show the car all the way through the frame off resto. It's a very nice head turning ride anywhere you take it!

There are lots of details I'm possibly leaving out but this covers most of it. It will definitley make someone a super nice Pto Street or Pro Touring car.i will consider your trade with some cash and I know you will not be disappointed
ASKING $22500 OR MAKE A GOOD OFFER I WILL TRADE GIVE ME A CALL 859-992-3485

Seller Phone Number: 859-992-3485

This item is USED

Trades ACCEPTED: NO BIKES BOATS OR FULL RACE CARS ULESS YOU HAVE MONEY

Payment options:

CASH

Item Location: NEWPORT, KY Get Directions To This City

Instructions for buyer:  I CAN NOT TRAVEL

This ad expires in 29 days.