These intakes are made from either:

1. TIG welded 3 inch madrel bent stainless tubing with a 1/4 inch thick CNC cut stainless flange and dipstick mount. They also come with two 1/8 inch NPT ports in the back for methanol/water injection, boost gauge, etc.

2. Exact same intake as described above but made from aluminized steel tubing and cold rolled steel for the flange.

The stainless intakes cost $180 each plus shipping. The steel intakes cost $130 each plus shipping, which is usually under $15 in the continental U.S.

Powder coating will be available within the month, which I highly reccomend for the steel version.

These intakes can be run with or WITH OUT the intake heater grid. They offer a huge air flow gain over the stock intake horns, due to the choke down Cummins put in their intakes to create room for the two driver side flange bolts. Also by using circular tubing in one smooth bend over square tubing in two hard 90 degree bends, these intakes offer much less drag. Which results in quicker turbo spool, lower egt's, and less over all strain on your motor.

If you have any questions please feel free to email me, jallenba@fit.edu, or call at 321-591-6310.

Seller Phone Number: 3215916310

This item is NEW

Trades ACCEPTED: Parts for a 2004 Dodge 3500 might be accepted.

Item Location: MALABAR, FL Get Directions To This City

This ad expires in 21 days.