This car now includes the following:

Powdercoated 4130 driveshaft
Billet slip yoke
HD U-joints
Chrome scoop tray
Chrome scoop tray mount
Fiberglass hood scoop
Dzus button kit for hoodscoop
Throttle cable
Simpson Parachute
B&M Transmission Cooler
Simpson seat belts

All you need to race is a motor, transmission, converter, headers and plumbing! The best news of all is the price is unchanged at $32,400!

Please click the blue "Dealers Web Site" link to the right. We have many more pictures and other cars in stock for you to see.

2008 Undercover Motorsports Ultralink

These world class race cars feature the following standard features:

240" wheelbase
1/4" 6061 T-6 aluminum CNC cut, drilled & profiled front motor plate
1/4" 6061 T-6 aluminum CNC cut, drilled & profiled mid motor plate
New Advanced narrow stance a-arms with tight turning radius
Streamline aero tube a-arms LARGE upper & lower
Stiletto 4130 chrome-moly spindles
4130 chrome-moly spindle arms
4130 chrome-moly tie rods
4130 chrome-moly steering heims
Special offset steering heim washers
Stiletto Billet aluminum rack & pinion
Custom profiled aluminum rack & pinion mount
Custom aluminum butterfly steering wheel with special made grips
Lightweight steering shafts
Steering shaft "SAFETY FRONTAL IMPACT"
Steering shaft idler bearing
Steering shaft in dash nylon idler washer
Custom aero dynamic body built out of 5052-.040 aircraft grade aluminum
Body is laid out, cut and fitted by professionals
Body has built-in lower ground effects lip
MR 5000 custom molded windscreen
Mil-spec dzus fasteners and springs
Custom molded fiberglass aerodynamic nose piece
Custom molded fiberglass seat with all seat belt cut outs
Custom aluminum fitted floor pan
Custom aluminum fitted firewall
Custom aluminum fitted leg protection plate
Custom aluminum fitted ignition component tray
"NEW" custom aluminum multi level dash w/ gauge cut outs
"NEW" custom aluminum over-lapping removable dash cover
Battery mount
Lower battery retainer straps
Battery hold down mount
Battery and main electrical chassis ground
Battery charging lug mount
Master cut off switch mount
Master cut off cable mounting tab
Rear master cut off cable mount
Parachute cable mount
Parachute lever and mount
Parachute mount
Parachute lanyard mount
5 gallon heavy duty clear poly urethane fuel cell
Custom fuel cell filler neck & cap
Fuel cell cover strap mounts
Steel fuel cell tray
Aluminum fuel cell cover strap
Fuel cell light mount
Fuel cell light switch mount
Fuel cell LED light
Fuel cell "safety" rollover valve & fittings
Gas and brake pedal assembly mounts
"NEW" adjustable gas and brake pedal assembly with positive brake and gas pedal stops
"NEW" throttle cable mount
Shifter mount
Seat belt mounts
Roll cage exit handles
Lower seat belt hooks
"NEW" multiple master cylinder mounts extra strong for no flex
Brake line mounting tab
Brake rod w/ stop
Chassis cable & wire hole covers
Ignition tray mounts
Blow shield mounts
Aluminum engraved custom blow shield
Dash mounts
Upper and lower mid motor plate mounts
Radiator mounts
Transmission cooler mounts
Remote water pump mount
Recovery tank mounting plate tabs
Lightweight dzus tabs
Engine saddles for front motor plate
Additional ground tabs throughout
Tie strap mounts "no more tie straps around lower frame rails"
9" fabricated sheet metal housing
1/4" reinforced front face plate with screw in stainless studs
Internal face plate gussets
Complete housing welded "inside throughout"
Jig fixtured & secured to welding table to insure proper axle to center section alignment
Jig fixtured & staggered time schedule welding process, minimizing heat build up
Lamb symmetrical housing ends
Fill and gear inspection cap and bung
Drain plug and exhaust pressure vent
1/8" 4130 chrome-moly 4 link brackets with support plates
1/8" 4130 chrome-moly front 4 link brackets with support plates
1 1/4" .095 4130 chrome-moly upper 4 link bars
1 1/4" .095 4130 chrome-moly lower x link with adjustable slider tubes
A-frame is engineered with the correct geometry and angle necessary for maximum traction
4130 chrome-moly heim joints
Double adjustable racing shock & spring
Car is completely assembled with grade 8 bolts, washers & poly nuts

CHASSIS MOUNTS & OPTIONS:

Anti roll torsion kit
In nose battery mount
Engine limiter kit with trans struts, trans ring & handle
Extra heavy-duty motor mounts
Electric fuel pump mount
Interior light mounts in cockpit
Ignition tray light mounts
K&R circuit board mounting frame
Upper seat belt hooks
Adjustable headrest mount
Handbrake mounting and hardware kit
Trans canister mounts
Vac & water puke tank mounting tabs and plate
Transmission puke tank mount
Nitrous bottle rack mounts - over rear end
Converter remote starter button mount
Converter LED light mounts
Behind dash electrical crossbar w/mounting tabs
C0'2 electric on-off solenoid mount

INTERIOR & BODY OPTIONS:

Removable dash cover (dzus kit)
Indy steering wheel "upgrade"
Indy wheel 4 hole button mount
Steering wheel quick disconnect
Floor tunnel - Glove box "combo"
Ignition access door
Tinted windscreen
Aluminum cover pan

BRAKE OPTIONS:

Tilton Master Cylinder
Strange Remote Master Cylinder
Complete Brake Line Kit (Dual set)
Inline 2Lb. Residual Valve
Aerospace Dual Rear Disc Brake Kit

CENTER SECTION & AXLES:

9" Strange Alum Third Member, 40 spline spool, 4.11 Big Pinion gear
Strange Hy-Tuff 40 Spline Axles
Strange Axles Bearings
5/8" Axles Stud Kit

WHEELS:

Weld Magnums, 16 x 16 Rears
Weld Magnums, polished, 17 x 2.5 Fronts
Pack wheel bearings and install races
Mount front tires to wheels
Spin balance front wheels
Mount rear tires to wheels
Spin balance rear wheels
Install racing rear valve stems

TIRES:

34.5 x 17 x 16 Goodyear 1022 D-2A compound rear tires
22.0 x 2.5 x 17 Goodyear 1445 front tires

DELAY BOXES:

K&R Pro Cube with 3 two stage timers
K&R Pro Cube delay box mount

IGNITIONS:

MSD 7 AL3 Ignition

AUTO METER GAUGES:

5" Phantom Tach with Recall
2" Phantom Oil Pressure - electric
2" Phantom Water Temp - electric
2" Phantom Trans Temp - electric
2" Phantom Voltmeter

ELECTRICAL OPTIONS:

Buttons:
Transbrake button with cord - Mushroom
Burnout button with cord - Mushroom
Bump Down button with cord - Mushroom
Bump Up button with cord - Mushroom
Direct transbrake button in dash

Lights:
Interior LED light package
Ignition Tray LED light package
K&R Relay Panel LED light package
Converter LED light package (illuminates under bellhousing)
Headlight package

Batteries:
Rock Racing Battery 850 amp deep cycle - nose mount
Single battery cable kit
Battery charging lug kit - clip in
Heavy Duty battery master cut off switch
Battery master cut off switch arm

Switch panel/wiring kits:
K&R Switch Panel and relay board
DragstersForSale.com wiring kit
Custom wire labels throughout

Shifters:
B&M ProBandit Shifter - Electric

SERVICE & LABOR:

Install master cylinder & complete brake line kit including hardlines, T-fittings & flex lines

Install complete handbrake master cylinder hardware, master cylinder, complete brake line kit including hardlines, T-fittings & flex lines

Install all cables, hook up master cut off cables to master switch with billet arm

Install all electrical components, delay box, ignition box, gauges, buttons, switch panel, LED light kits, etc. prior to wiring.

Professional wiring, including ground loops and balanced circuits as well as custom wire labeling and wire track guide for tracing.

COOLING SYSTEMS:

Ron Davis aluminum radiator, fan & shroud
Ron Davis radiator mounting kit

SAFETY ITEMS:

Adjustable padded & embroidered headrest
Custom embroidered full seat pad w/ pockets

CONTROL CABLES:

Complete master cut off cable kit
Complete cockpit master cut off cable kit
Complete parachute cable kit
Billet cable knob upgrade

POWDER COATING:

Powder coat interior: High Silver Metallic "Galva Silver"
Powder coat chassis: Candy Blue "Illusion Blue"
Powder coat radiator

CHROME:

A-Arms
Spindle arms
Tie rods
Spindle caps
Parachute lever
Helmet tab
Cockpit billet cable knob
Indy wheel 4 hole button mount
Handbrake rod to master cylinder
Roll cage exit handles
Seat belt hooks
Blow shield
Engine saddles
Fuel cell cap
Upper Ultra Link bars
X frame
Torsion arms
Torsion struts
Trans ring
Trans ring struts
Drive shaft loop
Parachute mount
Rear master cut off cable mount
Rear master cut off cable billet knob
Radiator shroud & side plates
Rear end filler cap
Parachute lanyard mount

JB Strassweg

812-434-2203 ofc
812-305-3666 cell
Info@Dragstersforsale.com

Seller Phone Number: 812-434-2203

This item is NEW

Trades ACCEPTED: We will always try to trade with you, just contact us for details!

Item Location: EVANSVILLE, IN Get Directions To This City

This ad expired 52 days ago.