These are new still in the box Edelbrock #60979 Alum.Heads for SBC They have 1.550" ex.& 1.940" Int.Valves.The smaller Valves Increase Low End Torque which will smoke the tires quicker & Increase gas mileage.They sell for $1158.00 a pair in mail order catalogs.
I will take $995.00 & pay freight in the lower 48 States.

Edelbrock E-Tec Cylinder Heads
Performance heads for Vortec-style intake manifolds.

Engineered for maximum performance, these new E-Tec series aluminum heads fit all small Chevys with Vortec-style intake manifolds. They incorporate Edelbrock's new high-quench 64cc combustion chamber design, which promotes more uniform atomization of the air/fuel mixture for more power. They're assembled with one-piece stainless steel valves, 1.46 in. valve springs, retainers, and locks. The heads accept either centerbolt or standard valve covers, and work with most exhaust manifolds and headers.


Brand: Edelbrock
Product Line: Edelbrock E-Tec Cylinder Heads
Part Type: Cylinder Heads
Part Number: EDL-60979
Cylinder Head Style: Assembled
Cylinder Head Material: Aluminum
Cylinder Head Finish: Natural
Combustion Chamber Volume (cc): 64
CNC-Machined Combustion Chamber: No
Intake Runner Volume (cc): 170cc
Exhaust Runner Volume (cc): 70cc
CNC-Machined Intake Runner: No
CNC-Machined Exhaust Runner: No
Intake Port Location: Standard
Exhaust Port Location: Standard
Spark Plug Style: Straight
Intake Valves Included: Yes
Intake Valve Diameter (in): 1.940 in.
Exhaust Valves Included: Yes
Exhaust Valve Diameter (in): 1.550 in.
Valve Springs Included: Yes
Maximum Valve Lift (in): 0.575 in.
Outside Diameter of Outer Spring (in): 1.460 in.
Damper Spring Included: No
Number of Springs Per Valve: Single
Retainers Included: Yes
Retainer Material: Steel
Locks Included: Yes
Lock Style: 7 degree
Valve Stem Seals Included: Yes
Valve Stem Seal Style: PC seal
Rocker Arm Studs Included: Yes
Rocker Arm Nut Thread Size: 3/8-24 in.
Rocker Arms Included: No
Rocker Arm Nuts Included: No
Guideplates Included: Yes
Guideplate Pushrod Size: 5/16 in.
Valve Cover Mounting Style: Center and perimeter bolt
Accessory Bolt Holes Drilled: Yes
Valve Guides Included: Yes
Valve Guide Material: Manganese bronze
Valve Seats Machined: Yes
Valve Seat Machine Style: 3-angle
Valve Seat Material: Ductile iron
Steam Holes Drilled: No
Oiling Style: Through pushrod
Machined for O-Ring: No
Heat Crossover: No

Seller Phone Number: 5407748605

This item is NEW

Trades NOT ACCEPTED

Payment options:

Item Location: ROANOKE, VA Get Directions

This ad expired 8 days ago.