i have here a 78 camaro rolling chasis

paint is awsome but hood needs to be painted
front end comes off the car its a 2 peace dog house head lights and turn signals are weather packed in
all lights work
line lock
wilwood disk brakes all the way around
koni 2way adjustable coil overs
barry grant 400 fuel pump with barry grand fuel pump voltage kick down box to drive it on the street
barry grant fuel filter
-10 braided line from fuel cell to the front
JAZ 12 gallon fuel cell with sending unit
all lines are braided
2 batteries with kill switch
12 point chromoly cage that was a NHRA cert in 03 (should certifiy agian)
kirkey aluminum racing seats with foam and 5 point RJS racing harness on driver and passenger side!!!!
auto meter tach with shift light,oil press, water, volts,
painless wiring harness put in where the cd player was
olds front loader rear end with 4.88 spool and 35 spline axles
adjustable laddar bars
back halfing was done with all 2x3 frame and aluminum pannels
weld pro stars 3.5 in the front 15x34x15 in the back, i have street tires that can come with the car mounted on matching rims for the right trade or $600
lots more stuff to list!!!!!!!
if your local come out and look at it
18:1 powermaster starter

-motor
468 roller motor
built to hold a 300 shot
comp 4/7 swap 785 lift hydro roller, 112 lobe separation
comp hydro roller lifters
lunati 1.7 roller lifters
moroso studd girdle
guide plates
ls6 steel crank
eagle rods
4 bolt main
milidon high volume oil pump
14:1 J&E nitrous gapped pistions
bowtie aluminum heads was told they have been ported too about 400 cfm
ferra valves
victor air gap intake
motor has been block filled half way up to the water jackets but drains still work
all arp nuts and bolts
tci fly wheel
motor is fresh from machine shop

-glide

brake
1.76 straight cut gears
sfi alluminum bellhousing
braided dipstick
coan internals
400 hardend imput shaft

-convertor
4500
9"
b&m

i am starting a business right now dont have money to finish. i would like to trade for something turn key

parts needed to finish
water pump
carb
drive shaft for p/g(i have a t400 shaft)
distributor

Seller Phone Number: 219 201 6760

This item is USED

Trades ACCEPTED: what do you have

Item Location: MUNSTER, IN Get Directions

This ad expires in 24 days.