This would be a new car built for you and to your needs. The car in the pictures is one of customer cars we built in 2007.

* 240 inch wheelbase
* Chassis CAD designed
* Chassis comes certified
* 4 adjustable slips, w/ 6 sliders on framerails
* 4130 tig welded chassis on jig to ensure consistency
* Front weight provision (does not include weight box)
* Two point streamline a-arms
* SPE 4130 spindles with 4130 steering arms standard
* SPE rack and pinion
* Tie rods with 4130 rod ends
* Aluminum fuel cell
* Battery tray with JBRC billet aluminum hold down
* Battery charge lug mount
* Battery cable portals through frame rails
* 1 inch Bullet Nose @ end of foot box
* Complete steering column with anti-spear bushing
* Aluminum steering wheel with aluminum grips
* Removable aluminum floor
* Aluminum dash with gauge holes and delay box mount
* Aluminum dash cover
* Knee protector plate with ignition mounts
* Shifter mount (choice of shifter, shifter not inc)
* Adjustable throttle pedal with stop and cable
* Adjustable brake pedal
* Master cylinder mount with linkage and WILWOOD master cylinder
* Brake lines run through rails and plumbed to bulkhead on housing
* Brake line tabs
* Parachute lever mount with lever
* 6 point low profile roll cage w/ cage liners
* 23 inch wide driver compartment standard
* Helmet hook on cage
* Exit assist handles on cage
* Seat belt mounts
* Composite seat
* Aluminum driver protection plate w/ CNCd logo and nameplate
* Radiator mounts (radiator inc)
* JBRC CNCd Aluminum front and rear motor plate as per customer
* 4130 Motor plate saddles with clamps
* 4130 blow back struts
* Aluminum trans plate w/ integral handle, mounts etc...
* JBRC fabbed 9 inch 4130 housing w/ MOSER 35 spline axles, studs etc...,
* NAS bolts installed throughout
* Parachute mount with cable (chute not inc)
* Master shutoff switch w/ lever in footbox
* Fiberglass nose
* One Piece Fiberglass body from nose to decal panels
* 1/4 turn fasteners installed
* Scratch resistant lexan windshield
* 6 ground studs on chassis
* 4130 rod ends installed where applicable

Seller Phone Number: 317-892-4054

This item is NEW

Trades NOT ACCEPTED

Payment options:

Item Location: PITTSBORO, IN Get Directions

This ad expires in 21 days.