Ad #1172838 Posted:2008-04-07 15:09:50
This ad expired 9 days ago.
Professional Monster Truck
Complete Operation or truck by itself
Complete Operation or truck by itself
$135,000.00
Tool cart is loaded with every tool needed to work on the truck. I am including every tool needed to operate a monster truck team including the jack. The tools are insured for $30,000...there is everything you would need from impacts to wrenches of every size to specialty tools. Tool cart is 4' high x 3' deep x 8' long and has a work top with a bench vice. Makes for an easy work station when your trailer is no where close by.
Bad Habit Monster Truck SpecsAbove Added: Thu April 24, 2008, 10:32 am EST
MTRA Certified 2007
*Truck will not be available until fall 2008 due to sponsorships and race schedule*
For Sale: $135,000 -Truck, spare parts, and tool cart (without body and name)
Complete Operation (without body and name) Truck, spare parts, tool cart, and Hauler: $250,000
Best of everything, ready to race
Chassis: D.O.M. Tube chassis, 156â wheel base, 4-link design, built by Jerry Richmond; he has also built trucks like Overkill, Extreme Overkill, Maximum Overkill, and Screaminâ Demon
Wheels: Custom made, light-weight, 1-piece wheels
Tires: 66âx43âx25â Goodyear Terras, 6ply, rears have treads back cut and fronts are shaved down just about as light as you can get them.
Axles: Rockwell F-106 center sections with Patrick 45" housings. Racesource inner seals. Clark 20 ton outers (knuckles, spindles, planetaries)
Suspension: King Triple Bypass Shocks and King coil overs on front, air springs in rear/ 18â Travel fronts and 26â travel rears
Transmission: Race built Turbo 400 by Abruzzi Racing Transmissions
Steering: front- Saginaw pump belt driven off crank with Nowack Orbital valve rear- nowack high-speed 12volt pump
Fire System: Safecraft 5lb bottle with nozzles located in cab and over motor
RII system: Motorsports Communications system with personal radio that runs on center channel. Works with promoter radios as well on both right and left lane
Seating: Mastercraft suspension seat custom upholstered with marine vinyl
Harnesses: Simpson 5 point with Camlock
512 c.i. Chevrolet Motor Specs
Engine Builders: Scott Tedder (765)-934-1421
Scott Koffel (419)-433-4410
Displacement: 512 cubic inch
Block: (dry) Bow Tie Mark IV / filled by Scott Koffel
Heads: (dry) Brodix BB2 Solid Aluminum
Crank: 4â Chevy/ tungsten int. balanced
Rods: Howards Aluminum (.650?)
Pistons: Wiesco 1.480 comp. Height:: with 8.5:1 compression
Cam: Ralph Banter / Gaerte Racing Engines (Special design for pulling trucks and tractorsâ¦*awaiting specs)
Plugs: NGK B9ES
Plug Gap: 17
Blower: 871 BDS at 10% overdrive with Enderle Buzzard hat and barrel valve
Fuel pump: Enderle 110
Spare Parts:
-transmission
-planetary
-spindle
-center section
-starter
-sway bar links
-various engine parts (rockers, push rods, etc)
-universal joints
-yokes
-rear steer pump
-front steer pump
-blower belt
-flex plates
-oil pumps
Seller Phone Number: 330-518-3297
This item is USED
Trades NOT ACCEPTED
Item Location: YOUNGSTOWN, OH Get Directions
REPORT THE SALE, CLICK HERE
Member's Other Ads

RESOURCE LINKS
- Financing
- Transportation/Shipping
- Purchase Protection
- Insurance





