1996 Camaro Z/28. 383 ci small block LT1 Oliver billet 4 bolt splayed caps, Callies racemaster crank 3.75 stroke, Oliver 4340 6.0" I beam rods, JE domed pistons 12 to 1 compression, meling hv & hp oil pump, canton 7 qt road race pan, AFR 190 cc intake fully CNC'D heads, Comp cam .541 lift, comp pro magnum 1.6 rocker arms, 4340 comp puch rods, comp hydraulic roller lifters, port matched LT1 intake, 58mm holley throttle body, Accel 36 lbs injectors, Holley 255 lph fuel pump, Meziere electric water pump, Moroso fabricated valve covers, CSR ultra mini comp. starter, 7.5" fluidampr, new optispark, Moroso Blue max wires, MSD digital 6 ignition, NOS sportsman fogger system, NOS purge valve and bottle heater, stand alone holley fuel system for NOS, TCI competition TH 400 full manual reverse pattern, TCI super street fighter 4000 stall converter with anti-ballooning plate,TCI flex plate, CSR flex plate shield, TCI trans cooler with braided lines, Hurst pistol grip shifter, 3.5" steel drive shaft with 1350 u-joints, Strange 12 bolt rear end, 33 spline pro race axles with spool and 4.11 gears, Hooker super comp full length headers, Mufflex 3" off road y-pipe, Mufflex 4" y-pipe back exhaust with flowmaster and stainless tip, BMR track pak rear suspention kit with all heim joints, Eibach sportline drop springs, 6 point weld in roll bar, simpson 5 point harness, Auto meter gauges and tach, The car make about 485hp on the motor and has jetting for a 150hp and a 250hp shot of NOS, the best i have run on drag radials w a 150hp shot was a 10.78 at 121 with a 1.58 60 ft. can email me for more pictures

Seller Phone Number: 262-443-0019

This item is USED

Trades NOT ACCEPTED

Payment options:

Item Location: OCONOMOWOC, WI Get Directions

Instructions for buyer:  buyer responsible for shipping. can deliver up to 250 miles.

This ad expired 26 days ago.